Temp Controller, 120V Plug and Play PID (Inkbird IPB-16S)

Home > Equipment > Temperature Controllers >

Alternative Views:

Our Price: $125.00

Quantity in Stock:2

Product Code: TEMPCONTROL_IPB16

Qty:

Description

This is the second generation of the game changing Inkbird IPB-16 which was already the most cost effective plug and play PID-based controller available anywhere. This new IPB-16S adds both built in pump switch as well as a heater enable/disable switch.The cabinet is slick, the digital numbers are big and bright, and it can handle a full 15 amps at 120 volts (1650 watts) for around a hundy. What?

Unlike all the other inexpensive controllers that have mechanical relays, this is a true PID controller capable of short cycle oscillation for precise temp control. It is the best controller for use with a 120 volt RIMS tube.

The probe diameter included with the controller is approximately .2" or 5mm (and 2" long). The probe is a stainless steel capsule so it can be installed through the sidewall of a kettle by using our weldless PCOMP4 fitting or a suitable thermowell.

The main power receptacle is fed off the solid state relay for up to 1650 watts. The pump outlet should only be used for a pump or other low current device.

Accessories

Weldless Probe Compression Fitting for pots/kegs PCOMP4

Our Price: $15.00

Add

Weldless Probe Compression Fitting for pots/kegs PCOMP4

Average Rating: Average Rating: 3.5 of 5

3.5 of 5 Total Reviews: 11 Click Here to Write a Review »

0 of 0 people found the following review helpful:

120V PID	Monday, February 16, 2026
Reviewer: Daniel Larsen from owens cross roads, AL United States

If you are going less than 10 gallons this should work. I got mine for a 7 gallon project. This works great. I also like that the new style comes with a replaceable sensor. Remember the thermowell. The sensor is good, but probably better dry. Came in a reasonable amount of time and this is the cats meoww. for 120V temp control.

Was this review helpful to you?

0 of 0 people found the following review helpful:

scorched wort	Saturday, February 6, 2021
Reviewer: Anonymous Person

i bought the RIMS kit. worked great for about 10 batches at most now it scorches every batch. tired it all to fix the issue.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Fragile Temp probe	Wednesday, December 2, 2020
Reviewer: Anonymous Person

The controller works very well but the temp probe breaks easily. I can't get another one which renders the whole thing useless and these guys don't answer emails.

Was this review helpful to you?

0 of 1 people found the following review helpful:

Not very good	Friday, May 22, 2020
Reviewer: Mike Socha from Sugar Land, TX United States

4th time I use the controller. the ground plug broke.
Sent an email with a picture to [email protected] on May 16th; no response..

Was this review helpful to you?

0 of 0 people found the following review helpful:

	Monday, April 20, 2020
Reviewer: EchtBier from Potomac Falls, VA United States

So far so good. Only disappointment is the unit only accepts NTC sensor, will not accept PT100 like the IPB-16 does.

Was this review helpful to you?

View All Customer Reviews

	Rubber Stopper, Solid, #9.5 $1.75
	Push Fit Fitting (Duotight) - 6-way VALVED manifold for 8mm or 5/16" OD Tube $19.99
	SULTANA (formerly DENALI) Hop Pellets, LB $19.00
	Brewbuilt X3 Glycol Jacketed 7 gallon Conical/Unitank Fermenter $1,199.99
	2" TC x 1/2" Female NPT Low Profile Adapter - With Stop $16.00