Home > Equipment > Temperature Controllers >

Temp Controller, 120V Plug and Play PID (Inkbird IPB-16S)
Temp Controller, 120V Plug and Play PID (Inkbird IPB-16S)
 
Alternative Views:
Our Price: $125.00

Quantity in Stock:(Out of Stock)

Product Code: TEMPCONTROL_IPB16
Qty:

Description
 
This is the second generation of the game changing Inkbird IPB-16 which was already the most cost effective plug and play PID-based controller available anywhere. This new IPB-16S adds both built in pump switch as well as a heater enable/disable switch.The cabinet is slick, the digital numbers are big and bright, and it can handle a full 15 amps at 120 volts (1650 watts) for around a hundy. What?

Unlike all the other inexpensive controllers that have mechanical relays, this is a true PID controller capable of short cycle oscillation for precise temp control. It is the best controller for use with a 120 volt RIMS tube.

The probe diameter included with the controller is approximately .2" or 5mm (and 2" long). The probe is a stainless steel capsule so it can be installed through the sidewall of a kettle by using our weldless PCOMP4 fitting or a suitable thermowell.

The main power receptacle is fed off the solid state relay for up to 1650 watts. The pump outlet should only be used for a pump or other low current device.

Accessories
Weldless Probe Compression Fitting for pots/kegs PCOMP4
Our Price: $15.00

Add
Weldless Probe Compression Fitting for pots/kegs PCOMP4

Average Rating: Average Rating: 3.5 of 5 3.5 of 5 Total Reviews: 11 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 120V PID Monday, February 16, 2026
Reviewer: Daniel Larsen from owens cross roads, AL United States  
If you are going less than 10 gallons this should work.  I got mine for a 7 gallon project.  This works great.  I also like that the new style comes with a replaceable sensor.  Remember the thermowell.  The sensor is good, but probably better dry.  Came in a reasonable amount of time and this is the cats meoww. for 120V temp control.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 scorched wort Saturday, February 6, 2021
Reviewer: Anonymous Person  
i bought the RIMS kit. worked great for about 10 batches at most now it scorches every batch. tired it all to fix the issue.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2 of 5 Fragile Temp probe Wednesday, December 2, 2020
Reviewer: Anonymous Person  
The controller works very well but the temp probe breaks easily.  I can't get another one which renders the whole thing useless and these guys don't answer emails.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
1 of 5 Not very good Friday, May 22, 2020
Reviewer: Mike Socha from Sugar Land, TX United States  
4th time I use the controller. the ground plug broke.
Sent an email with a picture to [email protected] on May 16th; no response..





Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Monday, April 20, 2020
Reviewer: EchtBier from Potomac Falls, VA United States  
So far so good. Only disappointment is the unit only accepts NTC sensor, will not accept PT100 like the IPB-16 does.

Was this review helpful to you?

View All Customer Reviews


Fermentis Safale BE-134 Saison Dry Yeast 11.5 g $4.39
Red Plastic Ball Lock Soda Bottle Carbonator / Carbonation Cap with Interior DUOTIGHT STEM PCO1881 Thread $6.99
Heating Element Kit, 1650 watt TC, Weldless TC, Clamp, Gasket $97.50
Corny Keg, Ball Lock, 2.5 gallon, Dual Handle, New (AMCYL) $89.00
Portuguese Floor Corker $69.00
Oak, Hungarian Cubes, Medium Toast 3oz $5.49
Stainless Steel Hose Barb Tee/Splitter 5/16" $2.99
Flavoring, Natural, Blueberry, 4oz $4.68