Home > Equipment > Fermentation >

BrewHardware Insulated Glycol Tubing Kit for Jacket Fermenters (TC PORTS)
BrewHardware Insulated Glycol Tubing Kit for Jacket Fermenters (TC PORTS)
 
Our Price: $159.00

Quantity in Stock:4

Product Code: GLYCOLINSULATEDKIT_X3
Qty:

Description
 

There is an insulated tubing kit that was developed specifically for the BrewBuilt Jacketed Conical though it was often out of stock. We came up with our own in-house version and made some improvements along the way and also offer it for a cheaper price.

Kit Includes:

  • 1 - Insulated 3/8" ID Tubing Set (2 x 6' lines)
  • 1 - Set of dual channel QDs with one button release.
  • 2 - 1.5" Tri-Clamps
  • 2 - 1.5" T.C. Gaskets
  • 2 - 1.5" T.C. 90 degree hose barb adapters
LINES ARE PRE-TERMINATED to the QDS and TC adapters with crimped Oetiker clamps. The spacing between the two TC flanges is specific to the Brewbuilt X2 and X3 jacketed fermenters.

What are the improvements? Lower profile since the hoses attach to the TC ports with hardware 90s. The short length of tubing that is left connected to the jacket space gives you SOME protection against overpressurizing the jacket during CIP cycles thought we highly recommend leaving the hoses connected when making large temperature changes. For example, if you just emptied the fermenter of beer that was cold crashed in the 35F area, you do not want to disconnect the glycol hoses and run a 150F CIP cycle. The huge jump in glycol temp in the jacket will likely blow the QD off the hoses.

Accessories
1.5 TC Clamp 1.5 TC Silicone Gasket (Heat Resistant to 400F) Glycol Coolant DUAL INLINE Quick Disconnect Set (CPC connectors) 1.5 TC x 3/8" Hose Barb
Our Price: $7.59

Add
Our Price: $2.00

Add
Sale Price: $28.99

Add
Our Price: $10.00

Add
1.5 TC Clamp 1.5 TC Silicone Gasket (Heat Resistant to 400F) Glycol Coolant DUAL INLINE Quick Disconnect Set (CPC connectors) 1.5 TC x 3/8" Hose Barb

Share your knowledge of this product. Be the first to write a review »


Hose Barb, 1/2" Female NPT x 5/8" Hose ID $4.00
Extract Kit: Jolly Kiwis IPA (NEIPA) $82.49
Extract Kit: British Nut Brown (You're gonna love my nuts) $47.30
Glycol Chiller, Brewbuilt Icemaster Max 2 with Heat Mod $899.00
Crystal 120L (Caramel Malt), Briess LB $2.48
Spike Plus CENTER Pickup Tube (All Sizes) $44.00
CO2 Hose - Bevlex Tubing, Beer Thread Tailpiece to Open End (for barbs) $5.99
750ml Emerald Green Bordeaux Wine Bottles, Case of 12 $17.99
Spike Flow Pump 120V with 1.5" TC PORTS $320.00