Home > Equipment > Electric Brewing > Heating Elements >

Heating Element, Threaded, 2200 watt, 120v, All Stainless Steel
Heating Element, Threaded, 2200 watt, 120v, All Stainless Steel


 
Our Price: $25.00

Quantity in Stock:8

Product Code: ELEMENT2200


ELEMENT OFFSET?:


Qty:  
Description
 
No more rusty element bases after two batches! This element will make 2200 watts on 120 volts. The length of the element from the hex flange to the tip is 8.25 inches. At 65 watts per square inch, it's effectively a LWD element.

2200 watts on 120 volts will draw a little over 18 amps. For that reason, you will need a 20 amp circuit. This wattage is just enough to bring 4 gallons to a rolling boil or 5 gallons to a simmer. You will not be happy with this if you plan to boil 6 gallons for a 5 gallon finished batch size.

The base on this unit stainless steel and will not rust. The threads are standard 1" NPSL like 99% of the elements you'll find out there. Weldless installs such as with our EWL enclosure kits will require a 1.25" hole in your vessel.

By default these elements will not fit down inside a 1.5" TC RIMS tube. If that was your planned use, you need to select "offset" in the options drop down and we will put enough bend on the element to get it centered upon the base.

Note: the manufacturing process causes some heat discoloration on the stainless and they are not polished or visually stunning in any way. While we typically like our equipment to look shiny as possible, this item is more about durability and function.

MADE IN THE USA.

It is extremely important that you consult with an electrical professional for advice or wiring help. Under no circumstances should these be used without proper wiring, ground fault circuit protection, over current circuit protection. We are not licensed electricians so we cannot provide wiring advice.
Instructions

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 4 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Works great December 27, 2019
Reviewer: Christopher Caporgno from Mount Vernon, WA United States  
Works great. Quick service, all good

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Hot! June 10, 2019
Reviewer: Jedediah Mullis from Clinton, UT United States  
This heating element worked perfectly and was slightly bent to fit inside my RIMS tube exactly as ordered. It was shipped quickly and I have no doubts I'll get years of use out of it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 July 21, 2018
Reviewer: rickey walsingham from jackson, GA United States  
Have not had a chance to test , However I am sure it will be fine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Gets Hot February 26, 2018
Reviewer: Shane FK from SOMERVILLE, MA United States  
This element works. It is easy to hook up.

Was this review helpful to you?