Home > Equipment > Kegging Parts > Beer Side, Faucets etc >

1.5" TC to Female Beer Thread Adapter
1.5" TC to Female Beer Thread Adapter

Alternative Views:

Our Price: $11.99

Quantity in Stock:35


These fittings give you 1.5" TC Triclover ports on any beer thread fitting. The primary usage would be to create a Sanke Keg cleaning system based of a pump and hoses that already use TC flanges.

The fitting is shown threaded on to the beer out port of a Sanke coupler, but the coupler is not included obviously. In order to pump into the beer out of a Sanke coupler, you will need to remove the check ball from inside.

The fitting ships with a silicone oring installed.

Average Rating: Average Rating: 3 of 5 3 of 5 Total Reviews: 1 Click Here to Write a Review »

  1 of 1 people found the following review helpful:
3 of 5 Nice, but threaded section too long for coupler November 25, 2019
Reviewer: Justin from Canada  
Seems like a good fitting. The larger bore + o ring design maximizes flow rate - ideal for keg cleaning and filling applications. The threads match well with the couplers I've tried. My only issue is that the threaded section is a bit too long and the fitting can not be installed far enough to compress the o-ring on some couplers I've tried. I hope to remove 3/8" from the threaded section or so, so I can use it as intended.

BrewHardware.com Response: That is very odd. They work for all the coupler types we have handy in the shop.  I'm sure there are a few odd designs out there.

Was this review helpful to you?