Return to True Weldless Bulkhead - With 90 ELBARB (mini diptube)

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 3

1 of 1 people found the following review helpful:

Great Product October 30, 2017 Reviewer: Nick Parker from Fort Payne, AL United States   This worked perfectly first try. Such a simple little device, but so superior to the alternatives. The bottom of my aluminum kettle has a pretty good sized radius, so to get the bulkhead in the right place (to put the mini diptube near the kettle bottom) I had to place the bulkhead where there was a slight curve. It still worked perfectly, sealing up tight the first try. Was this review helpful to you?

1 of 1 people found the following review helpful:

item as described September 26, 2017 Reviewer: Adam Hervert from Pierce, NE United States   Item arrived timely and is as described, have not had a chance to use it yet but looks like a good piece of equipment. **Edit** . item has exceeded expectations doesn't leak, performs well, well made, and is a great piece of hardware.  thanks brewhardware you have a customer for life. Was this review helpful to you?

0 of 1 people found the following review helpful:

Diptube does not fit June 28, 2017 Reviewer: Mark Owens from Loveland, OH United States   I planned on using this in a 5G Igloo cooler.  The Diptube is too long to attach to the nipple and insert it through the cooler.   It causes the bulkhead to angle, so the Diptube is useless to me. Was this review helpful to you?

1 of 1 people found the following review helpful:

Buy this. April 13, 2017 Reviewer: Gregg Fraser from Louisville, CO United States   Locks down tight. Doesn't leak. Who could ask for more? The previous version was good, but the silicone gasket allowed the valve to move and twist a little. With the new o-ring design, you can crank it tight, metal-to-metal. And because it's one piece, you don't need a bunch of teflon tape to keep liquid from channeling out through the threads. Was this review helpful to you?

0 of 0 people found the following review helpful:

Fantastic product April 13, 2017 Reviewer: David Rennoldson from Banglamung, Chonburi Thailand   Well made, easy to install. Excellent bit of kit. Was this review helpful to you?

0 of 0 people found the following review helpful:

Excellent Bulkhead October 3, 2016 Reviewer: Ryan Bailey from Atlanta, GA United States   I have a few different bulkhead design in my current rig including this one. This bulkhead is miles ahead of the competition and will be the only one I purchase going forward. I haven't had a leak yet and am not anticipating one. Was this review helpful to you?

0 of 0 people found the following review helpful:

Does what it says September 1, 2016 Reviewer: Jason Morgan from Appleton, WI United States   Have installed them and they do make a tighter fit than standard bulkhead fittings.  The barb tubes work great. Was this review helpful to you?

0 of 0 people found the following review helpful:

Great service August 8, 2016 Reviewer: Pete Stapley from Grand Rapids, MI United States   I emailed Bobby with a question and heard back within a half an hour. Also my products were shipped very quickly. Was this review helpful to you?

0 of 0 people found the following review helpful:

What an Amazing Value July 7, 2016 Reviewer: A. Tucker from Waterford, MI United States   As one who has participated in the Teflon gymnastics with old school weldless bulkheads, the simplicity and elegance of this design is stunning and such a welcomed addition to the modern homebrewing experience - installs in minutes and it's done. I have two of these in my brewery; one with a flat gasket in a 10gal cooler HLT and one with an o-ring in my boil kettle. Thanks for your many contributions to the craft Bobby! Was this review helpful to you?

0 of 0 people found the following review helpful:

HLT water inlet April 12, 2016 Reviewer: Jeremiah Fiegl from Overland Park, KS United States   Leak free, I love these new TRUE fittings, Bobby did a great job resolving an inherent issue with the traditional weldess fittings. You can't go wrong! Was this review helpful to you?