Return to Spincycle Overboard, No-Drill Kettle Whirlpool Return

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 5

0 of 0 people found the following review helpful:

Awesome Product September 6, 2020 Reviewer: NTW from Montgomery, TX United States   Purchased to whirlpool in Digiboil/ Mash n boil. Tight trub cone with just a little solar pump. Huge impact in chilling time. Was taking almost 40 minutes to get 20 degrees over tapwater temp- with spincycle, 8 minutes to 10 degrees over. Clearer beers from a bent piece of stainless! Thanks guys- this was the missing link in my electric setup. Was this review helpful to you?

0 of 0 people found the following review helpful:

Multi-use tool for your brew day! June 29, 2020 Reviewer: M. Napolitano from Hauppauge, NY United States   I bought this for my Anvil Foundry 10.5 and it is excellent! I added the extra 18" length to get down into the kettle and a camlock male end to match my existing setup. It does everything... Lower it into the top of the grain-pipe to recirc during the mash. Recirc 180 degree wort to sanitize. Put the recirc end against the chiller coils for a recirculating wort immersion chiller. Recirc to aearate and pump chilled wort into the fermenter, adjusting heigfht as I go with the spring clamp. Was this review helpful to you?

0 of 0 people found the following review helpful:

May 26, 2020 Reviewer: Jeff Lynch from greenville, SC United States   Used the Spincycle Overboard with my new Mash and Boil with pump and it worked as advertised. I bought the one with the plain end and would have liked for it to have a barbed end. Good solution- no drilling or welding. Was this review helpful to you?

1 of 1 people found the following review helpful:

Another grand slam! May 24, 2020 Reviewer: Todd Umphrey from Linwood, MI United States   I purchased a new Anvil Foundry 10.5 gallon brew system and of course tried to"rig" up a way to whirl pool in it and failed.  I once again turned to Brew Hardware for a solution and once again they had one.  The No-Drill kettle whirlpool arm arrived quickly and is of the same high quality as everything else I have ordered from them.  The amazing innovative solutions that Brew Hardware comes up with and the absolute high quality of their products makes them the go to place for brew equipment hardware.  Great job.  **And the whirlpool arm works fantastic!! Was this review helpful to you?

0 of 0 people found the following review helpful:

Perfection May 6, 2020 Reviewer: Chris McEntyre from Lexington, VA United States   I love how versatile this thing is...I can put it in the hop spider at flame out and collect a large amount of hop matter then point it directly at my immersion chiller to drop the temp super fast. And of course the craftsmanship is the best just like everything Bobby sells. Was this review helpful to you?

0 of 0 people found the following review helpful:

Works great on the Anvil Foundry 10.5 May 6, 2020 Reviewer: Nathan W. from Alton, IL United States   I bought this for my Anvil Foundry 10.5 and it is perfect. I added the extra 18" length to get down lower into the basket plus a camlock male end to whirlpool. It works excellent. Keeps trub and hops in the center of the kettle so I draw off clearer wort. Love it! Was this review helpful to you?

0 of 0 people found the following review helpful:

Love this April 19, 2020 Reviewer: Aaron Carlson from Greenville, SC United States   Great product, gets my whirlpool going without having to drill a hole in my kettle and without needing an extra valve since I only use 1 pump.  Highly recommend. Was this review helpful to you?

0 of 0 people found the following review helpful:

Super easy April 13, 2020 Reviewer: Dennis Pynn from Rochester, NY United States   Love this!!  Super easy to use and especially if your not interested in adding another hole in your kettle.  I can use this for whirlpooling for a hop stand or chilling since I use an immersion chiller.  Worked great right out of the box. Was this review helpful to you?

0 of 0 people found the following review helpful:

Works real well March 14, 2020 Reviewer: Will H from Kinnelon, NJ United States   Very secure fit to the side of my Mega Pot 15 gallon kettle, easy to adjust the height and the direction of flow, didn't leak (used BLQD welded fitting), and created a great whirlpool that collected all the trub in a neat little pile in the center of the kettle.  One thing...if using hop bags, make sure they don't block the outlet.  Highly recommend. Was this review helpful to you?

0 of 0 people found the following review helpful:

Nice addition March 13, 2020 Reviewer: Gary smith from West Point , GA United States   While it’s not required for brewing it is a nice addition to my equipment. Was this review helpful to you?