Home > Equipment > Kegging Parts >

1/4 Male FLARE (MFL) to 1/4" Hose Barb
1/4 Male FLARE (MFL) to 1/4" Hose Barb


 
Our Price: $2.89

Quantity in Stock:106

Product Code: FLARE14XBARB14
Qty:

Description
 
304 stainless steel with 1/4" Male Flare on one end and 1/4" barb on the other.
Average Rating: 5 of 5 Total Reviews: 5 Click Here to Write a Review »

Accessories
Flare Washer, 1/4 Nylon
Our Price: $0.25

Add
Flare Washer, 1/4 Nylon


  0 of 0 people found the following review helpful:
 
A needed little pice May 10, 2019
Reviewer: Anonymous Person from Candor , NC United States  
I recently got a beer gun to replace a picnic tap. Unfortunately the beer gun is not available with a MFL fitting to attach it to the beer line so I was able to find this male threaded MFL fitting, and I used a short beer line between the beer gun barb and the male MFL barb. Connected to my existing beer line and it works great

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great for using CO2 around the brewhouse March 2, 2018
Reviewer: Brian Maude from Calgary, AB Canada  
Purchased this to attach to the female fitting I have on an extra 5lb tank I use for purging kegs etc so I can easily switch between the hose barb or a QD.

I use the barb to push CO2 into a fermonster for closed transfers. Just drilled some small holes in a solid #10 bung. CO2 in, beer out via racking cane to keg. Works great!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Exactly what I needed - good quality, too. September 24, 2017
Reviewer: Rob from NH United States  
Using a small piece of tubing, I attached this to the gas-in barb on my keg coupler so that it would work with my kegerator lines, which have swivel nuts on their ends.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great quality July 6, 2017
Reviewer: John Stepikura from Manalapan, NJ United States  
Nice quality

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great price on the hardware and shipping March 2, 2017
Reviewer: John from Spring Lake, MI United States  
Overall I was pleased with my order of the 2 pieces I needed.  My local HBS store didn't have the fittings I needed, and there were plenty of online stores that carried this sub $5 piece.

The problem I had, was every other place charged a ridiculous amount for shipping a small fitting.

But BrewHardware did not - and that is why I went with them.  They charged actual shipping for it - and it earned my business.  

Now they are on my list of online suppliers where I know I'll get a fair price with fair shipping.

Thanks.

Was this review helpful to you?