Return to Spincycle Shorty, Thread-In Whirlpool Return for Welded Couplings

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 2

0 of 0 people found the following review helpful:

Vigorous whirlpool December 29, 2023 Reviewer: schwartzr33 from Grand Rapids, MI United States   Ran whirlpool for 10 minutes and then let wort sit for 5 minutes. Trub pile was much bigger than stirring by hand Was this review helpful to you?

0 of 0 people found the following review helpful:

Awesome addition May 3, 2022 Reviewer: Mike S from Caledonia, WI United States   Very well made product that works very well as an internal kettle drain.  Nice and close to the wall so it doesn't interfere with my brew basket. Was this review helpful to you?

0 of 0 people found the following review helpful:

April 27, 2022 Reviewer: Odin Anderson from Bellevue, WA United States   Was this review helpful to you?

1 of 1 people found the following review helpful:

It works, but December 16, 2021 Reviewer: Ron from Lancaster, CA United States   It's hard to adjust the angle of the output. It isn't tight where it's sitting, but shouldn't need too much adjusting over time. For what it's worth, I'd buy it again because it meets my needs, just something to consider if you're OCD. Was this review helpful to you?

2 of 3 people found the following review helpful:

Does not fit October 16, 2021 Reviewer: Rick from IL United States   Did not work on either my 2 Mega-Pots, or my Polar-ware pot. I should have got the one of the other Spin cycles instead. BrewHardware.com Response: I'm disappointed that you didn't contact me about the issue before posting the review since I didn't have a chance to make it right. What exactly about that fitting didn't fit? The description is very clear about what it is used for. It is meant to thread into an existing 1/2" Female NPT port on the inside of a kettle. What where you trying to do with it? I use this fitting in system builds almost every day and I've not ever found it to be defective. If you were trying to use it for an application that it was not intended for, that would be considered user error. If you called us ahead of time and asked for application advice, we would have directed you to the appropriate product. We would have done the same even after the fact but we haven't heard from you. Was this review helpful to you?

0 of 0 people found the following review helpful:

Perfect for whirpool February 23, 2021 Reviewer: Anonymous Person   Soldered in a pull through bulkhead (M/F) and added this inside the kettle.  Works fantastic and is low profile. Was this review helpful to you?

0 of 0 people found the following review helpful:

Low profile and very effective July 19, 2020 Reviewer: Bukit from San Diego, CA United States   Bobby recommended the Spincyle shorty and I'm really pleased with low profile and strong WP effect.  It threads in finger tight and can be removed similarly with ease for cleaning.  Nice product. Was this review helpful to you?

0 of 0 people found the following review helpful:

Best whirlpool solution! May 24, 2020 Reviewer: Mike P from Hanahan, SC United States   I have been waiting patiently for the Spincycle short option to return to stock for some time now. Well worth the wait. Best space saving whirlpool and recirculating solution available for my keggle HERMS system HLT and BK with outstanding results. Was this review helpful to you?

0 of 0 people found the following review helpful:

January 13, 2020 Reviewer: Adam from Ohio   Does a fine job creating a whirlpool. Low profile. Easy to attach and set to desired flow direction. Was this review helpful to you?

0 of 0 people found the following review helpful:

Awesome November 20, 2019 Reviewer: Erik from Riverside, CA United States   Exactly what I was looking for Was this review helpful to you?