Home > Equipment > Keg, Pot, Cooler Parts > False Bottoms / Filters >

Stainless Steel False Bottom for Brew In a Bag (BIAB) - 14.75" Diameter
Stainless Steel False Bottom for Brew In a Bag (BIAB) - 14.75" Diameter


 
Alternative Views:


Our Price: $36.99

Quantity in Stock:50

Product Code: BIABBOTTOM15


BIAB Bottom Leg Length:


Qty:  
Description
 
First is a false bottom specifically designed for Brew In A Bag process. When you use a mesh bag in a pot, whether it's directly fired on a burner or heated electrically, you want to keep the bag off the bottom. Typical homebrew false bottoms have really small holes and cut off the free flow that mesh bags are known for. Another less desirable choice is a steamer rack or tray that is found in kitchen shops, but none of those are stainless steel and would rust after some time.

We've redesigned the support structure by using 1/8" thick, 1/2" wide 304SS flat bar that is rolled into a ring and further supported by an X-shaped cross brace. The legs are made of M8 metric bolts and are threaded into five nuts that are welded to the underside of the support structure. This modular leg style allows for just about any height you need just by changing out the length of the bolts.

This unit will fit into pots between 15 and 16" in diameter.

OPTIONS:
You have the choice of several lengths during purchase, electable in the drop down menu. Note that if you select "no legs", the screen still has the welded nuts that will accept legs in the future. Without the bolt legs, the screen will sit about 5/8" off the bottom supported by the bottom rolled ring. The heights listed in the drop down refer to how much clearance you will get between the bottom of the pot and the bottom of the FB support structure.


While it uses a max of 5 legs, you can use it without the center leg in case your heating element is in the way. IMPORTANT: The leg attachment points are strong enough to support the weight of just about any grain bill you throw at it, along with a reasonable rate of pump-recirculated wort. However, you must use care and evaluate how fast of recirculation your exact bag can handle before it starts clogging with fine particles. It is possible to circulate too quickly and create a hydraulic vacuum underneath that will damage the BIAB false bottom. Due to the vast surface area, it doesn't take much pump suction to exert a massive force. Please throttle your pumps down a bit, especially if you mill near flour particle sizes.

NOTE: Every effort has been made to smooth out and eliminate any sharp edges on the top surface of the unit where the mesh is cut flush with the support ring. We urge you to do one last check before first use to be sure there are no remaining sharp spots that may snag your BIAB mesh bag. If you find one that we've missed, it can be touched up with a file or some sandpaper.

Again, make no mistake about it. If you see another product like this on any restaurant supply store, amazon or ebay, know that they are all chrome plated steel and they will rust.

Average Rating: 4.5 of 5 Total Reviews: 11 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
BIAB False Bottom February 14, 2019
Reviewer: David Mroski from Covington, LA United States  
The false bottom works perfectly with my 15 gallon Spike V3 kettle!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Best BIAB false bottom available January 7, 2019
Reviewer: Brett Lynes from Edmond, OK United States  
Heavy duty polished stainless steel. This will support the heaviest of grain bills with ease. Fits my Spike 15 gallon kettle perfectly. Combined with my Wilser bag, this makes for a perfect recirculating EBIAB setup.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
October 19, 2018
Reviewer: Anonymous Person from Davenport, IA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
False bottom is built very sturdy March 8, 2018
Reviewer: philip styf from Spanaway, WA United States  
The false bottom is very sturdy.  Welded very well.  Ended up flipping the false bottom over to reduce the space below by a half inch.  Very good quality for the money.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
It is really sweet! March 5, 2018
Reviewer: John Vasiliadis from Magnolia, DE United States  
This is something I have been looking to add to my electric brew kettle for quite some time. This is built extremely well and it a solid value, I highly recommend it to anyone who is electric brewing. I have been buying from Brew Hardware for years, all of their stuff is top notch and this is no exception!

Was this review helpful to you?

View All Customer Reviews