Home > Equipment > Pumps / Flow / Tubing > Pumps >

Chugger Pump Parts - Thrust Washer Set
Chugger Pump Parts - Thrust Washer Set


 
Our Price: $1.99

Quantity in Stock:2

Product Code: CHUGGERTHRUST
Qty:

Description
 
This is a set of replacement thrust washers for the impellers on the standard Chugger pumps. The small thrust washer goes around the impeller shaft, just under the impeller. The larger washer goes into the back cover of the head and lubricates the magnet side of the impeller. These items rarely wear out on pumps with less than 100 running hours on them but they are much more frequently lost down the drain or driveway when cleaning the interior of the pump head.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Fixed the pump shriek/stuck pump March 23, 2019
Reviewer: D. Sheets from OH, United States  
I used to get a shriek when the pump was running and then it would stop pumping while making that shrill noise. After reading online and seeing some of Bobby’s videos I decided to change the thrust washers. This ended up being a no-nonsense fix and now my two Chugger pumps work perfectly.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 It's all about customer service November 16, 2018
Reviewer: Carl Johantgen from Norwich, NY United States  
Product great. Customer service better

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Need washer Set Huggers like New. May 20, 2017
Reviewer: Phillip Ertel from Cary, NC United States  
My chugger pumps were needing a little TLC.   I order the high flow impeller, new o-rings and the thrust washer set.  Installed them and adjusted the head alinement per Bobby's video and the pumps run like new.
Great products and fast shipping as always.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Chugger Thrust Washers March 9, 2017
Reviewer: Francis Owens from Puyallup, WA United States  
Items as described and fast delivery. Thanks.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Not perfect in March pump July 1, 2016
Reviewer: Timothy Kaufman from East Berlin, PA United States  
I got these thrust washers to replace the missing ones in my March pumps. The Chugger and March are pretty much the same, right? Maybe, maybe not. The larger washer that goes in the back cover doesn't seat down in the hole as one would expect. I haven't used the pump with the washer yet, so maybe this is fine. If not, a little trimming should do the trick. Any way it goes, the pump will be less noisy so these are worth getting if your white nylon washers are missing.

Was this review helpful to you?

View All Customer Reviews