Home >

Labor Charge - Convert BrewCommander To 4-wire NEMA 14-30P power feed (5ft cord)
Labor Charge - Convert BrewCommander To 4-wire NEMA 14-30P power feed (5ft cord)

Our Price: $46.00


This charge is specifically to rewire the Blichmann BrewCommander controller to have a NEMA 14-30P feed cable. This is the plug found on modern electric dryers. As you may have read elsewhere, the Brewcommander 240 volt unit is fed by two separate plugs:

It has one NEMA L6-30P, 240v/30amp locking plug to power the controller and the element output.
It has one NEMA 5-15P, 120v/15amp straight blade plug to power the pump switch and output.

If you do not want to have two receptacles wired to accommodate this, we can remove the two short wires and plugs and replace with a single 5 foot long cable with a NEMA 14-30P on the end. Of course, it is up to you to ensure that you have a 14-30R receptacle to plug into.

Note: During this conversion, we can also switch the unit to wall mount so the wires exit from the bottom of the unit instead of the back. We will not charge extra for this service. You just have to put a comment in the checkout notes area and let us know that you want it to be wall mountable in addition to the 14-30P conversion.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
5 of 5 What a great option August 22, 2020
Reviewer: Brad Probert from Farmington Hills, MI United States  
I knew I wanted a Brew Commander, and with Blichmann pricing, it's the same at any shop.  But this option to rewire and make use of the 4-wire 240V outlet I had rather than have to run two separate power cables is just sheer genius!  Something that is such a no-brainer option and great to have this level of customization available.  I also went for the wires coming out the bottom (wall mount configuration) which they do for free while doing the 4-wire conversion.  Great stuff!

Was this review helpful to you?