Home > Equipment > Temperature Controllers >

Temp Controller, 240V/30a Auber Cube Advanced Controller
Temp Controller, 240V/30a Auber Cube Advanced Controller

Alternative Views:

Our Price: $569.00
Sale Price: $499.00
Savings: $70.00

Quantity in Stock:(Out of Stock)


Note: This is the advanced version of the cube. We will highlight the differences below in RED:

The Auber Instruments Cube controller is a feature rich tabletop style controller capable of providing precise temperature control as well as boil intensity control for boil kettles. It can handle up to a 6000 watt element. The heart of the system is the EZboil "brain" that is unsurpassed by any other industry PID. We've been recommending Auber controllers for years and finally started stocking units for your convenience. This is essentially a single vessel controller, suited very well for BIAB vessels but it could also be used for a budget multi-vessel controller if you're willing to swap plugs between elements.

In Mash Mode, set a target temperature by twisting the input knob and pressing in the knob to set it. An advanced PID algorithm will run the element as aggressively as possible without overshooting to get you brewing as fast as possible. When the temp is reached it will sound an internal alarm and start an internal mash timer. The advanced version of this controller uses the DSPR-320 version of the EZboil which add automated temperature adjustments to whatever program/schedule you prefer. For example, you can set a step mash schedule such as:
1. Stay cold (70F) for 9 hours (overnight).
2. Heat to strike temp (130F) for 1 minute.
3. Mash Protein Rest at 120F for 10 minutes.
4. Ramp to Sacc Rest temp at 154F for 45 minutes.
5. Ramp to mash out at 170F for 10 minutes.
All of that can be programmed ahead of time so you don't have to touch the controller.

In addition, the two aux 120v outputs that are typically powering pumps can be triggered by the EZ boil schedule whereas those switches are completely manual on the economy controller.

In Boil Mode, the unit will run the element 100% output to ramp to a boil quickly but as soon as it approaches boil, it will sound an alarm and automatically ramp the power down to whatever power setting you've entered. This avoids boilovers without having to watch the kettle like a hawk.

Due to the dual 120v outlets, the power input for the entire controller is 4-wire (hot, hot, neutral, ground). This package includes the L14-30R receptacle for power input but not the cable or the male plug. See an accessory cable in the list on the right.

The standard temperature probe we offer with this controller is 4" long and has a built in weldless bulkhead. The hole required in your pot is 9/16". The sensor cable is quick disconnectable from both the controller box via XLR plug and also on the probe end so you can move your kettles easily for cleaning without removing the entire probe. We also stock a 1/2" NPT threaded short probe sensor if you want to install it inline with your plumbing in a tee.

Share your knowledge of this product. Be the first to write a review »