Home > Equipment > Keg, Pot, Cooler Parts > Bulkheads >

Clip-On Trub Guard
Clip-On Trub Guard


 
Our Price: $10.00

Quantity in Stock:260

Product Code: TRUBGUARD
Qty:

Description
 
Keep most of that trub out of your drain without a filter device.

This is a slight reconfiguration of our heat shield assembly that allows clipping to the side of a kettle dip tube to keep your pile of trub away from the exit point. This is especially useful when you whirlpool your boiled wort to make a neat pile in the center of the pot. That pile usually stays put until it becomes exposed to air and then it collapses and falls towards the sidewalls of your pot. This simple clip on guard will stay in place during the whole boil and keep most of the trub out of the pickup at the end of the draining process.

We position the clip for best fit on our truebulkheadelbarb but it will also work with a street elbow threaded into a welded coupling bulkhead that acts as a mini diptube.

The 3" high x 5" wide stainless plate should be touching the bottom of the pot for best results. The plate and clip are 304 stainless steel.
Average Rating: 4.5 of 5 Total Reviews: 9 Click Here to Write a Review »

Accessories
High Flow Elbow Barb
Our Price: $6.75

Add
High Flow Elbow Barb


  0 of 0 people found the following review helpful:
 
Great! February 25, 2017
Reviewer: Dan Ledbetter from Rio Rancho, NM United States  
Keep the gunk out!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
did not work as well as I hoped February 3, 2017
Reviewer: STEVE MICELI from Holmen, WI United States  
I used this on a standard elbow.. It tilted up slightly and did not function well..  Wish you made the proper elbow this is designed for with  Male threads.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good for clearer wort January 17, 2017
Reviewer: Bob C from East Amherst, NY United States  
Does the job but would like to see it come with a silicone boot on the bottom.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
This really works July 29, 2016
Reviewer: Gregg Pessin from Kirkwood, MO United States  
I had some doubts about the trub guard but it did the job. I whirlpooled the wort and then transferred to my fermenter. All the trub was further in than the guard.  Afterwards it was easy to clean. Finally solved my trub issue.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
This trub guard actually worked June 1, 2016
Reviewer: Black Dog Brewery from New York  
I did my first transfer from the BK to the fermenter last weekend using this trub guard.

It clips on perfectly to the 1/2" NPT stainless elbow.

The guard left much more hot break / cold break material in the BK without getting sucked into the fermenter.


Was this review helpful to you?

View All Customer Reviews