Home > Equipment > Kegging Parts >

Tailpiece, 3/8" Barb, Stainless Steel
Tailpiece, 3/8" Barb, Stainless Steel
 
Our Price: $2.75

Quantity in Stock:354

Product Code: TAILPIECE38SS
Qty:

Description
 
This tailpiece is typically used on the gas side of a Sanke Keg Coupler or on the back of a kegerator shank for use with 3/8" ID tubing though 5/16" will also stretch over with some heating. While we suggest 1/4" or 5/16" ID hose for CO2, some commercially available kegerators or bar installs already have 3/8" tubing so this is what you would need for that.

Accessories
Flare Washer, 1/4 Nylon Hex Beer Nut for Shanks and Keg Couplers - BEER THREAD (5/8 BSP aka 7/8-18") NOT NPT Neoprene Beer Washer
Our Price: $0.25

Add
Our Price: $0.99

Add
Our Price: $0.37

Add
Flare Washer, 1/4 Nylon Hex Beer Nut for Shanks and Keg Couplers - BEER THREAD (5/8 BSP aka 7/8-18") NOT NPT Neoprene Beer Washer

Share your knowledge of this product. Be the first to write a review »


Mash Recirculation Return For Anvil Foundry System - Your choice of input fitting $8.99
Flavoring, Natural, Lime Extract, 4oz $9.89
Camlock Quick Disconnects - Cam A with BSP Thread (Anvil Foundry) $6.25
Fuggle Hop Pellets, LB $19.80
Push Fit Fitting (monotight) - TINY Coupling 6.35mm to 6.35mm (1/4") TINY $1.99
Nectaron (NZ) Hop Pellets, LB $37.40
3/4" NPT Threaded Nipples - Close (short) $2.00
Heating Element Kit, 5500 watt TC Ripple, Solder TC, Clamp, Gasket $109.00
Candi Syrup, 1 LB JUG, AMBER 45 Lovibond $8.99