Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-200 in increments of 5
Sight Calibration Decals 5-200 in increments of 5
 
Our Price: $8.00

Quantity in Stock:18

Product Code: CAL5-200
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


1/2" or 3/4" TC Clamp $6.00
Push Fit Fitting (Duotight) - 5-way manifold/splitter for 8mm or 5/16" OD Tube $4.99
Flavoring, Natural, Grapefruit, 4oz $4.68
PET Keg, 1 Gallon (Oxebar brand) $11.99
1.5" Triclover to 1/4" MFL (male flare) adapter $10.00
Safbrew WB-06 Wheat Beer Dry Yeast 11.5 gram $5.38
2 TC x 3/4" Female NPT Adapter $16.00
Wine Expert Private Reserve Yakima Valley Pinot Grisio Wine Kit $174.90
SSbrewtech Unitank 2.0 Glycol Jacketed 17 gallon Conical/Unitank Fermenter $1,399.00