Home > Equipment > Vinyl Decals >

Sight Calibration Decals 2-25 in increments of 1
Sight Calibration Decals 2-25 in increments of 1
 
Our Price: $5.00

Quantity in Stock:73

Product Code: CAL2-25
Qty:

  
Description
 

If you transferred your sight kit to another pot, you'll need to recalibrate it so we are offering the numbers separately. These also complete the job if you've built your own DIY sight glass or (GASP!) purchased a kit from someone else.

Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Site Review June 7, 2017
Reviewer: Robert Walker from Mendon, MA United States  
You're the only place I could find these decals.  Shopping experience was fine.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Vinyl Letters January 19, 2016
Reviewer: jeff hofstra from rochester, NY United States  
The vinyl letters were the cheapest around. The packaging was great. They were delivered in a flat envelope. Thanks again to Bobby for his attention to details.

Was this review helpful to you?



Flavoring, Natural, Cherry, 4oz $5.12
3" TC Silicone Gasket (Heat Resistant to 400F) $3.50
Monster bottle rinser (Similar to the Vinator) $15.00
Gypsum (Calcium Sulfate) 2 oz $1.65
Fermentation Belt Heater (18 watts) $17.99
Heating Element, 5500 watt THREADED, All Stainless Steel POLISHED $34.00
Abstrax - Quantum Hop Extracts 5ml- SIM SIMCOE $16.49
Fermentis SafLager 189 11.5 g $5.49
1.5 TC LONG Weld Ferrule $4.60