Home > Equipment > Fittings / Camlocks / Triclover > Camlock Quick Disconnects >

Male Camlock Socket Weld/Solder for 1/2" OD tubing
Male Camlock Socket Weld/Solder for 1/2" OD tubing
 
Alternative Views:
Our Price: $7.00

Quantity in Stock:4

Product Code: CAMSOLDER12
Qty:

Description
 
This fitting allows you to very cleanly add a 1/2" male camlock onto the end of a piece of 1/2" OD copper or stainless tubing. The fitting is bored all the way through with 1/2" so it will slide all the way over a piece of 1/2" tubing. You can silver solder it in place.
This is a fantastic way to convert a section of hard piped plumbing to a camlock enable hose connection or to create custom carboy fillers, racking canes, whirlpool arms etc. How about converting your immersion chiller in/out ports to camlock for each quick disconnect?

This item is for the camlock fitting itself. We also offer this fitting combined with a labor charge for TIG welding it to a piece of tubing of your choosing. See elsewhere on the site. The photo is showing what the fitting looks like attached to two different sizes of tubing.

If you plan to solder these, please keep in mind that stainless steel requires a special flux and regular paste flux that you use on copper will not work. We sell an inexpensive kit that contains the correct flux.

If you need a cam on the end of tubing, this is our favorite way to get there. If you're not comfortable with silver soldering the next best thing would be our special camlock to compression adapters:

Accessories
Silver Solder Kit (Harris Stay-Brite 8 and Stay-Clean Flux) Silver Solder Stay Brite #8 HALF OUNCE 1/16" diameter Racking Cane, Stainless Steel, 5/8" OD Tubing, 29" Length Custom Stainless Tubing with optional Bends
Our Price: $12.99

Add
Our Price: $7.00

Add
Our Price: $18.00

Add
Our Price: $5.00

Add
Silver Solder Kit (Harris Stay-Brite 8 and Stay-Clean Flux) Silver Solder Stay Brite #8 HALF OUNCE 1/16" diameter Racking Cane, Stainless Steel, 5/8" OD Tubing, 29" Length Custom Stainless Tubing with optional Bends
Racking Cane, Stainless Steel, 1/2" OD Tubing, 29" Length Racking Cane, Stainless Steel, 1/2" OD Tubing, 23" Length
Our Price: $15.00

Add
Our Price: $13.00

Add
Racking Cane, Stainless Steel, 1/2" OD Tubing, 29" Length Racking Cane, Stainless Steel, 1/2" OD Tubing, 23" Length

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 As described March 1, 2021
Reviewer: Zer0 from Salt Lake City, UT United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 weld on camlock February 23, 2016
Reviewer: Carl Noble from Tell City, IN United States  
Love camlock fittings!

Was this review helpful to you?



Weldless Sightglass Tee Kit, No Thermometer, TPNT for Pot $27.00
Heating Element, 5500 watt (240 Volts) 1.5" TC PREWIRED WITH ANY LENGTH CABLE $115.00
Midnight (Chocolate) Wheat, Weyermann LB $2.48