Home > Equipment > Keg, Pot, Cooler Parts >

Mash Recirculation/Sparge System for Lid-Mounted TC port.
Mash Recirculation/Sparge System for Lid-Mounted TC port.
 
Our Price: $39.00

Quantity in Stock:3

Availability:: Usually Ships in 3 to 5 Business Days
Product Code: MASHRECIRCULATIONTC_LID


Fitting Weld Option onto Leg A:

Qty:  
Description Operating Recommendations
 
Deliver mash recirculation wort and sparge water precisely to the top of any grain bed height with this kit. This was designed specifically for mashing vessels (or BIAB kettles) that have a 1.5" TC port in the lid. It would also work great in an Anvil Foundry system that has the appropriate TC adapter installed. You can adjust the output from the same height as the port all the way down to 12" below the port to adjust for varying grain bills. The height adjustment is done with a compression fitting on the top of the TC adapter which can be tightened and loosened and tightened by hand. The bottom of the 3/8" stainless tubing has a plastic diffusor tip on the bottom to spread out the flow. Ideally this is placed at the top of the grain bed to avoid unecessary splashing.

Options:
Basically you choose what kind of connector is welded to the top input side of the cane whether plain 3/8 tubing, QD, Camlock, or Triclamp.


These are built upon order so expect a few extra days of fabricatoin time.

Share your knowledge of this product. Be the first to write a review »


Amber Malt, Crisp LB $2.48
Extract Kit: Dry Irish Stout $35.20
INTERTAP/Nukatap Growler Filler Spout $6.99