Sight Calibration Decals 2-25 in increments of 1

Home > Equipment > Vinyl Decals >

Our Price: $5.00

Quantity in Stock:73

Product Code: CAL2-25

Qty:

Description

If you transferred your sight kit to another pot, you'll need to recalibrate it so we are offering the numbers separately. These also complete the job if you've built your own DIY sight glass or (GASP!) purchased a kit from someone else.

Instructions

- Your sight tubing must be dry and clean with no oils or dust.
- With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.
- Use a vertically applied length of masking tape on the sight tube as
- a straight edge and to have a place to mark the gallon levels.
- Skip to the 11 minute mark in the video to see how the decals are to be applied.

Average Rating: Average Rating: 5 of 5

5 of 5 Total Reviews: 2 Click Here to Write a Review »

0 of 0 people found the following review helpful:

Site Review	June 7, 2017
Reviewer: Robert Walker from Mendon, MA United States

You're the only place I could find these decals. Shopping experience was fine.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Vinyl Letters	January 19, 2016
Reviewer: jeff hofstra from rochester, NY United States

The vinyl letters were the cheapest around. The packaging was great. They were delivered in a flat envelope. Thanks again to Bobby for his attention to details.

Was this review helpful to you?

	Centennial Hop Pellets, LB $22.00
	EZ Cap 1 Liter Amber Flip Top Bottle, Individual $4.00
	Male Beer Thread (5/8" BSP 7/8"-14) to Female Garden Hose FGHT $9.00
	Temp Controller, 120V Plug and Play PID (Inkbird IPB-16S) $125.00
	Hot Pod Kettle Element Enclosure 2ETC3 2" TC enclosure, clamp and gasket $48.00
	Plastic Spoon, 24" $5.00
	Temp Controller, 240V/50a Brew Buddy II 3-Vessel, 2 Simultaneous Element Controller $1,499.00
	Easy Dens Density Meter (Anton Paar) Gen 2 $599.00
	Plastic Funnel, 10" with Strainer $9.99