Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-200 in increments of 5
Sight Calibration Decals 5-200 in increments of 5
 
Our Price: $8.00

Quantity in Stock:18

Product Code: CAL5-200
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


Dual Function Bottle Filler 3/8" od $2.99
Quick Disconnects (BLQD) Type GHA - MQD x Female Garden Hose $9.00
1.5" Triclover to 1/4" MFL (male flare) adapter $10.00
Omega Yeast Oktoberfest OYL-107 (similar to WY2206 and WLP-820) 150ml Liquid Slurry $10.99
24" Steel Mash Paddle $12.99
Roasted Barley (300L), Briess OZ $0.14
Potassium Metabisulfite, 1 LB $9.89
Quick Disconnect (BLQD)s Type E - MQD x 1/2" Hose Barb $6.99
Cable, 14/3, 5-15P plug to L6-30R Receptacle, 6 feet (CUSTOM ITEM) $27.99