Home > Equipment > Fittings / Camlocks / Triclover > Triclover >

1.5" TC x 1/4" Compression Adapter
1.5" TC x 1/4" Compression Adapter
 
Our Price: $17.00

Quantity in Stock:7

Product Code: TC15COMP14


Compression Ferrule*:

Qty:  
Description
 
The 1-1/2" Triclover (TC) with a 1/4" compression on the back side (for 1/4" OD rigid tubing). Sanitary welded. Select between the easily lockable/removable nylon ferrule or the more permanent set of stainless ferrules. The compression fitting is bore-thru meaning there is no tube stop and a piece of tubing can pass straight through. Machined from 304SS. Note that there is no wrench flat on this size so you will need to clamp the TC flange firmly to a larger object when setting the SS ferrules. Nylon ferrules are soft enough to set just by holding the TC flange by hand.

Remember, 1.5" TC has an actual flange diameter of 2".

Share your knowledge of this product. Be the first to write a review »


RIMS Package 18" LONG TUBE, PID controller, prewired and ready to use - Your Choice of IO Ports $359.00
Silicone Orings (PAIR) for Probe compression fittings (Pcomp) Gasket $1.50
Oregon Raspberry Puree, 49oz Can $32.99
Rubber Stopper, Drilled, #10 $1.75
SS Hose Clamp, Small 7/32" - 5/8" diameter, 10 PACK $12.00
Sight Calibration Decals 2-25 in increments of 1 $5.00
Sea Salt (Sodium Chloride) 1 LB $4.28
3" TC EPDM Gasket (for cold side use) $1.99
Solder or Weld Thermo Probe Compression Fitting for pots/kegs PCOMP5 $13.00