Home > Equipment > Fittings / Camlocks / Triclover > Triclover >

1.5" TC x 3/8" Compression Adapter
1.5" TC x 3/8" Compression Adapter
 
Our Price: $17.00

Quantity in Stock:34

Product Code: TC15COMP38


Compression Ferrule*:

Qty:  
Description
 
The 1-1/2" Triclover (TC) with a 3/8" compression on the back side (for 3/8" OD rigid tubing). Sanitary welded. Select between the easily lockable/removable nylon ferrule or the more permanent set of stainless ferrules. The compression fitting is bore-thru meaning there is no tube stop and a piece of tubing can pass straight through. Machined from 304SS. Note that there is no wrench flat on this size so you will need to clamp the TC flange firmly to a larger object when setting the SS ferrules. Nylon ferrules are soft enough to set just by holding the TC flange by hand.

Remember, 1.5" TC has an actual flange diameter of 2".

Average Rating: Average Rating: 3.5 of 5 3.5 of 5 Total Reviews: 2 Click Here to Write a Review »

  0 of 4 people found the following review helpful:
 
2 of 5 No title provided October 16, 2021
Reviewer: Chris Somers from Roseburg, OR United States  
BrewHardware.com Response: We didn't get contacted about any issues with this fitting and you didn't provide any descriptive text in this review to justify a 2-star rating.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great fitting September 8, 2020
Reviewer: Art from WI United States  
Not the most common fitting, but BrewHardware comes through with exactly what I needed!

Was this review helpful to you?



Weldless Large Sightglass Kit, LTSK For Kegs, NO Thermometer $28.00
4" TC EPDM Gasket (for cold side use) $1.99
Rubber Stopper, Solid, #7 $0.98
1.5 Liter Green Magnum Claret Wine Bottles, Case of 6 $19.99
2" TC x 1" Hose Barb $16.00
Ball Valve, 1/4" NPT to 1/4" MFL with Check $8.99
Pressure Gauge 0-40 PSI, 8mm Stem for DUOTIGHT fittings $7.99
pH Calibration Buffer Solution 10.01, Single Use Pack $1.79
Hot Pod Kettle Element Enclosure 2ETC3 2" TC enclosure, clamp and gasket $48.00