Home > Equipment > Mashing >

Tubular "Bazooka" Screen (12" Long) with 1/2 MNPT
Tubular "Bazooka" Screen (12" Long) with 1/2 MNPT
 
Our Price: $10.00
Sale Price: $5.99
Savings: $4.01

Quantity in Stock:65

Product Code: TUBESCREEN12
Qty:

Description
 
You can use this in your kettle to filter whole leaf hops or inside your converted cooler mash tun for batch sparging. The screen material is more rigid than the typical stainless braid solution. It comes with a welded stainless tubular screen, a short threaded SS nipple and a stainless Oetiker style (crimped) hose clamp to hold it all together. You can also loosen the clamp to clamp the screen over the VB2 variable length bulkhead to reduce the total number of parts. Approximately 13" total length, 1.25" diameter tube. If you need to make the tube a little shorter, you can roll the end and crimp again with pliers like rolling up a tube of toothpaste. We also have this in a much shorter version.

You can cut the clamp off the screen from the included close nipple and clamp it on to any other tube around 3/4" in diameter. You can also clamp the screen directly on to the end of our VB2 style bulkheads as well.

Several people have asked if this tube can be slipped over our "L" shaped keg diptubes and the answer is NO. The tube doesn't bend nicely due to the grid like nature of the screen.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 6 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
4 of 5 September 8, 2020
Reviewer: Jake D. from Alpine , CA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Very well built January 12, 2019
Reviewer: John from Edgewater, MD United States  
This is cheaper and much nicer then trying to make your own.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Tubular Screen with 1/2 MNPT September 21, 2015
Reviewer: Frank from N. Easton, MA United States  
What can you say other than great quality components, from a place with great understanding of what the home brewer needs, at a great price, fast shipping and great customer service.  Once again Bobby and his staff knock it out of the park.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Mash Tun May 24, 2015
Reviewer: Kelly Oldham from NSL, UT United States  
These parts worked great.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Screen March 15, 2015
Reviewer: JEREMIAH STAGE from WARSAW, IN United States  
Excellent pricing. I've seen the same item at twice the price on other retailers

Was this review helpful to you?

View All Customer Reviews


Tap Tower, Brushed SS, for Single Faucet (not included) $81.00
Camlock Quick Disconnects - Cam D $6.25
Sight Calibration Decals 5-300 in increments of 5 $9.00
Brew Built 15g FB Silicone Edge Gasket $13.49