Home > Equipment > Keg, Pot, Cooler Parts > Bulkheads >

Diptube (High Flow), Long Reach, for Pots with welded couplings
Diptube (High Flow), Long Reach, for Pots with welded couplings
 
Our Price: $11.50

Quantity in Stock:5

Product Code: DIPTUBEPOTSLONG
Qty:

Description
 
If you bought a pot with a welded coupling for the drain ball valve, installing this diptube on the inside will help you drain most of the liquid out. We've always suggested using a regular street elbow as a budget way of doing this, but these new purpose built diptubes don't have the problem of the internal threads that can hide soil. If you plan to use our pull through solder in bulkheads, this is a great upgrade. The reach of the tube is 1.5" down from the center point of the thread in fitting. It can be trimmed if needed. This version of the diptube is approximately 8" long to reach near the center of most pot sizes.

Note that the tubing portion of this diptube is really big. The OD is 5/8" and the ID is 9/16" for superior flow compared to all the other "maximizers" you find available.

Share your knowledge of this product. Be the first to write a review »


Kleen Plug for Beer Faucets $1.99
Cable Plug (locking), Nema L5-15P Plug for 120v, 15 amps $11.99
Rubber Stopper, Drilled, #6.5 $0.99
3" TC Spool, 1.5" Depth $32.00
Faucet Shank Polished Stainless Steel Trim Ring / Flange $2.85
Steam Slayer 1.5" TC WIDE-BODY Kettle Boil Steam Condenser Assembly $174.00
Oak Chips, Cognac Barrel, 4oz $5.16
Tailpiece, 3/8" Barb, Stainless Steel $2.75
Tailpiece, 1/2" Barb, Stainless Steel $4.50