Home > Equipment > Vinyl Decals >

Control Panel Labels
Control Panel Labels
 
Our Price: $8.00

Quantity in Stock:894

Product Code: DECALCONTROLSTOCK


Decal Color:

Qty:  

  
Description
 
If you're building a tricked out brewery control panel for your RIMS/HERMS or Electric brew haus, class it up with precision cut vinyl labels. The letters are approximately 3/8" tall. There is usually enough variety in the stock labels to accommodate a simple control panel. If not, please use the custom text version.


Install Requirements:


The basic idea is to use a square to layout horizontal lines on your control panel where you want your letters to sit. Cut the labels into strips, then into individual names like "Mash Temp". Dry fit them on the panel, watching for good centering. When you're happy, apply masking tape at one edge, fold it back using the tape as a hinge, remove backing from vinyl, fold back down and use a credit card to smooth out, remove clear top masking to leave behind only the vinyl lettering. If the vinyl starts peeling up with the masking, drop it back down and rub it down harder.

Select either black or white vinyl you want. BE CAREFUL!!! There's been some confusion about the color selection. After application, the only thing that is left on your control panel surface is vinyl letters in the color you select. There is no background color like a sticker. If you select white vinyl, you have white lettering on whatever surface you stick it to. Hint: if you have a white enclosure, use black vinyl and vice versa.


Using 3/8" tall text, you will be limited to 200 characters including spaces. For reference, the stock decals shown above is only ~200 characters so you should have enough to work with. After ordering, please use the contact link at the top of the site to send me the text you want included. If I don't hear from you, I'll attempt to email you at the address provided via Paypal. We can accomodate just about anything you want on your panel including logo graphics and even work out a template for hole cutting, but that's going to require a one-off quote and it will be more than a text-only cut.

Share your knowledge of this product. Be the first to write a review »


Butterfly Hose Clamp Large $1.25
Push Fit Fitting (Duotight) - TEE for 8mm or 5/16" OD Tube $2.99
Probe Compression Fitting 1/4" MNPT x probe PCOMP2 $13.00
CO2 Tank Refills $24.00