Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-200 in increments of 5
Sight Calibration Decals 5-200 in increments of 5
 
Our Price: $8.00

Quantity in Stock:18

Product Code: CAL5-200
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


Beer Captured (clonebrews part 2) Recipe Book $14.50
1.5" TC 45 FORTY-FIVE degree Elbow $15.00
Pressure Transfer Kit, Fermonster to Corny Keg (Build it Your Way) $18.00
Brew Built Conical Collection Jar 3" TC with lid (Gen2) $27.99
Biofine Clear (aka Kieselsol) 1 Liter (Vegan Fining Agent) $38.49
Quick Disconnects (BLQD) - FQD x 1/2" Compression $18.00
Nema 14-50P Cord Plug for 4-wire 240v, 50 amps $15.99
Omega Yeast German Bock OYL-111 (similar to WLP-833) 150ml Liquid Slurry $10.99
Extract Kit: Kool Down Kolsch (Light German Ale) $43.00