Home > Equipment > Fittings / Camlocks / Triclover > Triclover >

Triclover Reducer, 4" TC x 1.5" TC with Ball Lock Ports and PRV
Triclover Reducer, 4" TC x 1.5" TC with Ball Lock Ports and PRV
 
Our Price: $49.00

Quantity in Stock:(Out of Stock)

Product Code: TC4X15OFFSET_BALLLOCK
Qty:

Description
 
4" Triclover (TC) cap with a 1.5" TC ferrule welded offset to the side as much as possible. Measures 4.5" x 2"diameter actual flange diameters. 304 SS.

The assembly also has gas and liquid ball lock keg posts with a floating diptube as well as a 17psi venting pressure relief valve with a manual vent pull ring. The soft silicone floating diptube is long enough to reach the bottom of a half barrel keg.

Essentially this adds functionality to any vessel that has a 4" TC port on the top such as Conical fermenters, Brite tanks, or Kegmenters.

IT IS EXTREMELY DANGEROUS TO LOOSEN THE 4" or 1.5" TC CLAMP WHILE THERE IS EVEN A LITTLE BIT OF PRESSURE REMAINING IN THE VESSEL. BEST PRACTICE DICTATES THAT YOU VENT AND FULLY REMOVE THE PRV FROM THE ASSEMBLY BEFORE LOOSENING ANY TC CLAMPS !!!!!

Accessories
4in TC Clamp 4" TC Silicone Gasket (Heat Resistant to 400F)
Our Price: $12.25

Add
Our Price: $3.99

Add
4in TC Clamp 4" TC Silicone Gasket (Heat Resistant to 400F)

Share your knowledge of this product. Be the first to write a review »


Stainless Kettle with Basket Insert - 60 quart $149.00
Mugwort, 1oz dried $2.48
Abstrax - Quantum Hop Extracts 5ml- CIT Citra $16.49
Epsom Salts (Magnesium Sulfate) 1 LB bag $5.49
Omega Labs OYL-028 Belgian Ale "W" High Gravity (Compares to WLP530 and WY3787) 150ml Liquid Slurry $10.99
Plate Chiller (heat exchanger), LONG 20 plates $99.00
Fermentis Saflager S-23 Dry Yeast11.5 g $4.61
Faucet Shank, 4", Stainless Steel $19.99
Keg to Mash Tun Conversion Kit - 1 port WELD In with false bottom $128.00