Home > Equipment > Electric Brewing > Electric Systems and Kettles >

Anvil Foundry System 6.5 Gallon Electric System
Anvil Foundry System 6.5 Gallon Electric System
 
Our Price: $385.00

Quantity in Stock:(Out of Stock)

Product Code: ANVILFOUNDRY65
Qty:

Description
 
Yes. There are a LOT of all in one electric brewing "urns" out there. If you're shopping for one of them, your head is now spinning.

This particular one has a capacity of 6.5 gallons so it's really meant for a 2.5 to 4 gallon batch without any sparging.

We will not hash out every little feature of these units but we'll give you an idea of what makes the Anvil version so different.

  • The most important difference from our perspective is the higher power element. If you don't mind doing a little extra work to get a 240 volt circuit set up, you'll have a whopping 2800 watts at your disposal. No, that's not earth shattering power compared to what you can do with a 5500 watt "ripple" style element, but it is a full 1200 watts higher than all the other all in one units including the Grainfather, Mash N Boil, and Robobrew.
  • If your batch size is down near 2.5 or 3 gallons at the end of the boil, 120v is more than adequate.
  • Includes immersion wort chiller.
Talk to your local electrician to see what it would take to add a 15 amp, 240v GFCI protected circuit to your brewing area. It's worth it.

  • Another perk of the Foundry is that the lower 4" of the grain basket is also perforated just like the bottom disc which more than doubles the drainage of the other units.
  • Double wall construction means that you get better heat retention than the competition WITHOUT having to cover up that nice stainless with some jacket.
  • Last, the lid is gasketed and has built in spring latches so you can easily convert the unit to a distillation boiler simply by adding either the Turbo500 copper pot still arm or the Turbo500 reflux condenser.
  • 6.5 Dimensions
    Tank Diameter = 12.5 inches
    Distance Across the Handles = 17 inches
    Height of Base Unit = 21.25 inches
    Lid = 3.25 inches
    Total Height = 24.5 inches
    Spigot Height from Base = 7 inches
    Shipping Weight = 23 lbs
  • Wattage
    120V = 1600 watts
    240V = 2800 watts

Share your knowledge of this product. Be the first to write a review »


Push Fit Fitting Duotight - 5/16 (8mm) OD Tube x 1/4" OD Tube Reducer $2.89
Chocolate Rye, Weyermann OZ $0.15
Keg Coupler, Low Profile, American Beers (Type D) With BALL LOCK $59.99
HotRod Heat Stick, 240 VOLT 5500 watt Ready to Use $169.00
Tap Tower, Brushed SS, for Single Faucet (not included) $81.00
Bru-1 Hop Pellets, LB $25.30
Cable, 6 feet, 10/3 Cord with NEMA L6-30P Locking Plug $29.00
Quick Disconnects (BLQD) Type D - FQD x FNPT $11.00
CO2 Hose - Bevlex Tubing, Beer Thread Tailpiece to Open End (for barbs) $5.99