Home > Equipment > Electric Brewing > Heating Elements >

Heating Element, 5500 watt (*******208 VOLTS******) 1.5" TC INTEGRATED Ripple V2
Heating Element, 5500 watt (*******208 VOLTS******) 1.5" TC INTEGRATED Ripple V2
 
Our Price: $90.00

Quantity in Stock:46

Product Code: ELEMENT5500_RIPPLE_TC_208V
Qty:

Description
 
NOTE: These specific elements will generate 5500 watts on 208 volts which is typically what a 3-Phase commercial service will provide. This element will draw just under 27 amps. Do NOT use this element on 240v as it will draw more than 30 amps.


These elements are pretty slick. The traditional way to get an element into a TC port is to use an adapter such as our Hot Pod ETC which then had to be hardwired to a cord. These Ripple TC elements don't have screw in bases but are welded right to a 1.5" TC flange. Not only that, but the electrical connection is made by integrated NEMA L6-30P blades. You can twist an L6-30R cord end right on. This gives you the ability to disconnect at the pot rather than drag the cord around.

You will need a 1.5" TC port on your kettle and we offer several different ways to get that done; weld ferrule, solder ferrule, and weldless. These are available separately. The L6 cable is also available as a separate item. Again, this element does not include a gasket, clamp or TC port for your kettle. They are available separately.

Element length is approximately 14.5" Long to the TC flange. Please note that the length does vary across different production runs so if your kettle is going to be a tight fit, call ahead and we'll measure our current stock for you. We are not responsible for return shipping costs if you find that it doesn't fit.

Watt density works out at just around 75 Watts per Square Inch. We are often asked about LWD vs ULWD and we're yet to find any technical documentation that defines exactly what this means and what technical governing body decided what the WPI has to be for specific names. What we can tell you is that these elements do not scorch wort. It's the lowest watt density you can get for a 5500 watt element that also fits into kettles as small as 13-14" with a large TC ferrule welded in.

Everything is 304 High polish stainless steel.

It is extremely important that you consult with an electrical professional for advice or wiring help. Under no circumstances should these be used without proper wiring, ground fault circuit protection, over current circuit protection. We are not licensed electricians so we cannot provide wiring advice.



After years of experience with these elements, we have concluded that the connectivity between the L6-30 prongs and the mating female receptacle is a common point of failure as oxidation from humid environments begins to degrade conductivity. The best long term solution we've come up with is the use of a light coating of a product called Conductive Assembly Paste. It is expensive and not usually available in tiny packages but we've done the repackaging locally. We now include a 1mL syringe of this paste with the purchase of this style of element. Note that we only include a single 1mL tube for up to 3 elements purchased.
Instructions

Accessories
1.5 TC Silicone Gasket (Heat Resistant to 400F) Triclover Reducer 2" TC x 1.5" TC, Shallow Receptacle, Nema L6-30R Twist Lock Cord Receptacle for 240v, 30 amps 1.5 TC Radius Face Solder Flange
Our Price: $2.00

Add
Our Price: $15.50

Add
Our Price: $14.99

Add
Our Price: $20.00

Add
1.5 TC Silicone Gasket (Heat Resistant to 400F) Triclover Reducer 2" TC x 1.5" TC, Shallow Receptacle, Nema L6-30R Twist Lock Cord Receptacle for 240v, 30 amps 1.5 TC Radius Face Solder Flange
1.5 TC Clamp Plug, Nema L6-30P Twist Lock Plug for 240v, 30 amps Cable, 10/3 SJEOOW High Temp Portable Power Cable by the foot Cable, 10/3 Cord with Nema L6-30R Twist Lock Cord Receptacle (approx 5ft)
Our Price: $7.59

Add
Our Price: $9.99

Add
Our Price: $2.75

Add
Our Price: $29.99

Add
1.5 TC Clamp Plug, Nema L6-30P Twist Lock Plug for 240v, 30 amps Cable, 10/3 SJEOOW High Temp Portable Power Cable by the foot Cable, 10/3 Cord with Nema L6-30R Twist Lock Cord Receptacle (approx 5ft)
TRUE Weldless 1.5" TC Triclamp Bulkhead - STD up to 1/8" Wall
Our Price: $24.00

Add
TRUE Weldless 1.5" TC Triclamp Bulkhead - STD up to 1/8" Wall

Share your knowledge of this product. Be the first to write a review »


Sanke Keg Coupler Male Flare Tailpiece Adapter Kit $11.99
Mosaic Hop Pellets, 8oz $16.49
El Dorado Hop Pellets, OZ $2.48
Spike CF5 or FLEX Temperature Control Coil $120.00
Flavoring, Natural, Grapefruit, 4oz $4.68
Pressure Transfer Kit, Fermonster to Corny Keg (Build it Your Way) $18.00
Extract Kit: Fruit Beer $34.10
Pressure Release Valve (PRV), Large Bore, 1.5" TC, 12-18PSI Pressure $54.00
Spelt Malt, Weyermann LB $2.48