Rubber Grommet for CANE, 3/8" ID x 11/16" Hole Size

Home > Equipment > Fermentation >

Alternative Views:

Our Price: $1.75

Quantity in Stock:13

Product Code: GROMMETCANE

Qty:

Description

This grommet is sized for an 11/16" hole (or slightly smaller depending on how tight you want the 3/8" cane gripped). It will accommodate materials from 1/16 to 1/8" thick. In a fully relaxed state the interior hole is 3/8" which is what a smaller/standard racking cane measures. You CAN force a standard airlock into this hole though it will be very snug and may not fully insert. If this hole needs to be used for gas release, it would be better to shove a small scrap of 3/8" stainless or plastic tubing in, then attach a 5/16" or 3/8" ID hose onto that and drape it down into a container of starsan.

Average Rating: Average Rating: 5 of 5

5 of 5 Total Reviews: 1 Click Here to Write a Review »

1 of 1 people found the following review helpful:

Good product, 11/16" hole required	February 20, 2020
Reviewer: Daniel L. from Atlanta, GA United States

This product works exactly as advertised, but I ended up using a step bit to drill out my fermenter lid to 11/16". A 7/16" hole is too small to fit the whole piece through.

Was this review helpful to you?

	1.5" TC x 1/2" MALE NPT THREADS on both ends $16.00
	CO2 Regulator, KOMOS Single Pressure, 0-25psi $59.99
	Strata Hop Pellets, LB $23.10
	Stainless Oxygen (O2) .5 Micron Diffusion Stone with 1/4" MFL $11.99
	BTF Iodophor Iodine Based No-Rinse Sanitizer (similar to IO Star), 32oz $29.99
	1.5 TC x 1/4" Hose Barb $9.00
	Torrified Wheat OZ $0.10
	Crystal 10L (Caramel Malt), Briess LB (similar to CaraHell) $2.48
	Hop Creep IPA (NEIPA) V1 (Azacca/Citra) - 5 Gal All Grain Recipe Kit $49.50