NPT Swivel Connector, Cool Touch, 1/2" Female NPT x 1/2" Hose Barb

Home > Equipment > Fittings / Camlocks / Triclover > NPT Threaded Fittings >

Our Price: $8.99

Quantity in Stock:12

Product Code: NPTSWIVELCOOLTOUCH12BARB

Qty:

Description

These Stainless Steel "Cool Touch" fittings are a hybrid between a traditional NPT fitting and a quick disconnect. The female NPT side is cut a little loose so it will fully thread on to any 1/2" male NPT fitting to allow the included captured silicone O-ring to seat and seal. We hesitate to call them quick disconnects because you have to thread them on and off a few rotations just like a garden hose connector, but the one advantage these have is that they don't require a 2-piece design like other disconnect "sets". We call them Cool Touch fittings because the area that you grip to thread the fittings on is wrapped in silicone rubber that doesn't get as hot as the metal.

This particular fitting has a straight 1/2" hose barb on the other end which will accommodate 1/2" ID hoses (and even 3/8" ID silicone stretched over a bit).

Average Rating: Average Rating: 4 of 5

4 of 5 Total Reviews: 8 Click Here to Write a Review »

0 of 0 people found the following review helpful:

Absolutely LOVE these!	August 19, 2025
Reviewer: Derek McCullough from Cloivs, CA United States

I use them to build portable outdoor shower connections that use 1/2" npt hardware and high pressure vinyl hoses. These are the ONLY swivel head 1/2" npt to 1/2" barbed adapters I was able to anywhere online and I'm so glad I did. They are perfection. Please please don't stop making these, or let me know if you ever do so I can stock up. :)

Was this review helpful to you?

0 of 0 people found the following review helpful:

	July 14, 2021
Reviewer: Anonymous Person

Was this review helpful to you?

0 of 0 people found the following review helpful:

Great alternative to another brand	March 31, 2019
Reviewer: Chris Small from Wauconda, IL United States

Fits perfectly on my pump and Rims Rocket. Just as described and appears to be very high quality. Tested them yesterday and there were no leaks or issues. Great product!

Was this review helpful to you?

0 of 0 people found the following review helpful:

Not Great	March 5, 2018
Reviewer: Timothy Baker from Houston, TX United States

On first use the rubber grip became loose, becoming difficult to tighten. This affected nearly half of the ones I bought. I will probably replace these with the Blichmann version.

Was this review helpful to you?

1 of 1 people found the following review helpful:

Poor design	November 21, 2017
Reviewer: Jared from United States

The rubber slides easily so you cannot tighten it very much. Mine is actually stuck on now, as any attempt to unscrew it results in the rubber simply sliding around the metal.

Was this review helpful to you?

View All Customer Reviews

	Thermowell - TW15-M-TC15 $13.00
	CO2 Regulator, KOMOS Rebuild Kit (Diaphragm and Needle Valve) $9.99
	CO2 Regulator, Secondary, Duotight 0-60psi $18.99
	Carboy Brush $7.75
	Spike 1.5" TC x 5/8" Barb (90 Degree) $16.50
	Crystal 10L (Caramel Malt), Briess OZ (similar to CaraHell) $0.14
	Crystal 120L (Caramel Malt), Briess OZ $0.15
	LalBrew Voss Kveik Ale Dry Yeast - Lallemand $4.94
	Pull Through Solderable Bulkhead with Edge Pickup Kit $26.00