Home > Equipment > Keg, Pot, Cooler Parts >

SS Washer for 1/2 NPT, bulkheads, etc THICK 1/8"
SS Washer for 1/2 NPT, bulkheads, etc THICK 1/8"
 
Our Price: $1.85

Quantity in Stock:159

Product Code: SSWASH12THICK
Qty:

Description
 
Thick: 1/8" nominal thickness (closer to .11" actual), .825" inside diameter and 1.32" outside diameter. Note, if you use this one with 1/2" NPT threaded fittings, keep in mind that this washer will make contact just about at the thickest part of the threads. It will NOT fit over the fattest flat area of a pipe nipple though it will get to the middle of a close nipple.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 7 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 January 19, 2021
Reviewer: JAMES KEMPINSKI from Bethel Park, PA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good stuff May 8, 2017
Reviewer: Jerry Olstad from Fort Bragg, CA United States  
I have bought a lot of fittings and Camlock parts from these guys everything is top notch and functions as it should.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Great hardware October 20, 2016
Reviewer: Ryan Johnson from Aliso Viejo, CA United States  
These have a slightly smaller ID than the 1/16 washers so they don't slide all the way onto male NPT threads.  Otherwise great for adjusting for varying bulkhead thicknesses.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Worked great September 16, 2016
Reviewer: Ralph B from Sewickley., PA United States  
Just the right size for sealing my ball valve to my mash tun.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Quality washers April 28, 2016
Reviewer: Justin Heisler from Charlottesville, IN United States  
Great fit, does what it's supposed to.

Was this review helpful to you?

View All Customer Reviews


Tailpiece, 5/8" Barb, Stainless Steel $5.75
Rubber Stopper, Drilled, #7.5 $1.10
Priming Sugar Corn Sugar Dextrose 1 Lb bag $3.25
Pressure Release Valve Adjustable 0-25psi PRV $23.00
2 Gallon Bucket Lid Only - Drilled with grommet $3.25
1/2" NPT Threaded Nipples (ALL LENGTHS) $2.50
Plate Chiller Connection Kit - Basic $30.00
Rubber Stopper, Drilled, #7 $0.98