Home > Equipment > Kegging Parts >

Tailpiece, 1/4" 90 Degree Elbow Barb, Stainless Steel
Tailpiece, 1/4" 90 Degree Elbow Barb, Stainless Steel
 
Our Price: $4.85

Quantity in Stock:78

Product Code: TAILPIECEELBOW14SS
Qty:

Description
 
If your shanks are in a tight spot and you need the clearance, the 90 degree 1/4" barb is the answer for your 3/16 or 1/4" ID serving lines. Like all other tailpieces, you need a neoprene gasket and beer nut if you don't already have one.

Accessories
Hex Beer Nut for Shanks and Keg Couplers - BEER THREAD (5/8 BSP aka 7/8-18") NOT NPT Neoprene Beer Washer Flare Washer, 1/4 Nylon
Our Price: $0.99

Add
Our Price: $0.37

Add
Our Price: $0.25

Add
Hex Beer Nut for Shanks and Keg Couplers - BEER THREAD (5/8 BSP aka 7/8-18") NOT NPT Neoprene Beer Washer Flare Washer, 1/4 Nylon

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect for my Keezer May 5, 2021
Reviewer: from Maryland  
These were perfect for my keezer build trying to save some space and make things more manageable. Shipping was very fast and service was good. Thanks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great For Tight Spaces! November 6, 2016
Reviewer: John C from Hudson, FL United States  
Excellent for tight spaces or for towers! Worked perfectly for a custom portable corny cooler/kegerator build I made with a stainless shank and Perlick faucet. I used two round 10 gal. coolers and spliced half of one on top of the other so it was tall enough and the space was limited. This fit the bill perfectly!

Was this review helpful to you?



Double Bubble Airlock $1.19
2" TC EPDM Gasket (for cold side use) $1.35
2" TC to Ball Lock LIQUID Post $27.00
Corny Keg, Ball Lock, 5 gallon, Dual Handle, New (AMCYL) $92.00
Blowtie Variable Pressure Relief Valve (Spunding) with 0-15 psi gauge and Push Fit Connections $19.99
Plastic Funnel, 4.5" $3.00
Bravo Hop Pellets, LB $18.70
1.5 inch TC kit, ferrule, clamp, gasket and welding labor $59.99
Homebrew Decals - "Homebrewer" $3.00