Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-200 in increments of 5
Sight Calibration Decals 5-200 in increments of 5
 
Our Price: $8.00

Quantity in Stock:18

Product Code: CAL5-200
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


Potassium Bicarbonate 2 oz $2.19
2" TC White PTFE Gasket $2.20
BREWER'S BEST pH Test Strips BEER RANGE 4.6-6.2 100/VIAL $5.99
1/2" or 3/4" TC Silicone Gasket (Heat Resistant to 400F) $1.00
Fermaid-K Complex Yeast Nutrient - 28 gram bag $3.29
How to Brew All Grain - DVD Video $22.00
Locline, 1/2" size, WYE Splitter $3.99
PET Keg, 5 Gallons (Oxebar brand) $42.50
Stainless Ball Lock Soda Bottle Carbonator / Carbonation PCO1881 Thread Cap with Interior DUOTIGHT STEM $11.99