Home > Equipment > Fittings / Camlocks / Triclover > Triclover >

Triclover Reducer, 4" TC x 1.5" TC with Ball Lock Ports and PRV
Triclover Reducer, 4" TC x 1.5" TC with Ball Lock Ports and PRV
 
Our Price: $54.99

Quantity in Stock:21

Product Code: TC4X15OFFSET_BALLLOCK
Qty:

Description
 
4" Triclover (TC) cap with a 1.5" TC ferrule welded offset to the side as much as possible. Measures 4.5" x 2"diameter actual flange diameters. 304 SS.

The assembly also has gas and liquid ball lock keg posts with a floating diptube as well as a 17psi venting pressure relief valve with a manual vent pull ring. The soft silicone floating diptube is long enough to reach the bottom of a half barrel keg.

Essentially this adds functionality to any vessel that has a 4" TC port on the top such as Conical fermenters, Brite tanks, or Kegmenters.

IT IS EXTREMELY DANGEROUS TO LOOSEN THE 4" or 1.5" TC CLAMP WHILE THERE IS EVEN A LITTLE BIT OF PRESSURE REMAINING IN THE VESSEL. BEST PRACTICE DICTATES THAT YOU VENT AND FULLY REMOVE THE PRV FROM THE ASSEMBLY BEFORE LOOSENING ANY TC CLAMPS !!!!!

Accessories
4in TC Clamp 4" TC Silicone Gasket (Heat Resistant to 400F)
Our Price: $12.25

Add
Our Price: $3.99

Add
4in TC Clamp 4" TC Silicone Gasket (Heat Resistant to 400F)

Share your knowledge of this product. Be the first to write a review »


Fermentis SafAle S-04 Dry Yeast11.5 g $3.03
PRV, Corny Keg Replacement pressure relief valve PRV 60PSI All Stainless $5.99
2 TC to Male Beer Thread adapter $15.99
White Labs PPNG WLP051 California V Ale Liquid Yeast Pack $15.39
Nugget Hop Pellets, OZ $2.15
Hot Pod Kettle Element Enclosure 2ETC 2"TC enclosure ONLY $36.00
Omega Yeast Irish Ale OYL-005 (Compares to WLP-004 or WY1084) 150mL Liquid Slurry $10.99
Weldless Sightglass Elbow Kit, LK for SANKE Keg $27.00
1.5" TC Spool, 24" Length $29.00