Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-300 in increments of 5
Sight Calibration Decals 5-300 in increments of 5
 
Our Price: $9.00

Quantity in Stock:6

Product Code: CAL5-300
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


Stainless Oxygen (O2) .5 Micron Diffusion Stone with 1/4" MFL $11.99
Caramunich 1, Weyermann LB $2.48
Spike NPT Pickup Tube Center (All Sizes) $36.30
Pinch Clamp small for up to 1/2" OD tubing (5/16 thinwall racking) $1.50
24" Steel Mash Paddle $12.99
3pc Ball Valve with 1/2" NPT Male/Female Threads (SPIKE BRAND) $29.70
HotRod Heat Stick, 240 VOLT 5500 watt Ready to Use $169.00
Munich BARKE (8L), Weyermann LB $1.91
Spike 20gal Plus False Bottom(TC pickup tube) $181.50