Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-140 in increments of 5
Sight Calibration Decals 5-140 in increments of 5
 
Our Price: $5.00

Quantity in Stock:70

Product Code: CAL5-140
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


Extract Kit: Jolly Kiwis IPA (NEIPA) $82.49
1.5 TC x 3/8" Male NPT THREADS Adapter $12.00
Ball Lock Keg Disconnect ALL STAINLESS - Beer Side - Male Flare MFL $16.99
Keg Coupler, Low Profile, American Beers (Type D) With BALL LOCK $59.99
Kegmenter Fermentation Keg - 7.6 Gal $279.00
Silicone Tubing, Made in USA, 3/4" ID x 1" OD (Standard 1/8" Thick Walls) PER FOOT $3.69
Eat Sleep Brew Tee Shirt - Short Sleeve All Colors and Sizes $10.00
EnPrimeur Winery Series South African Sauvignon Blanc $165.00
Omega Yeast Tropical IPA OYL-200 150mL Liquid Slurry $10.99