Home > Equipment > Fittings / Camlocks / Triclover > NPT Threaded Fittings >

Hex Nipple - 1/2" NPT ECONOMY
Hex Nipple - 1/2" NPT ECONOMY
 
Alternative Views:
Our Price: $3.00

Quantity in Stock:63

Product Code: HEXNIPECONOMY12
Qty:

Description
 
These nipples are similar to NPT Close Nipples but they have a hex cast in the center so you can use a wrench on them. This economy version of our hex nipples are machined from cast 304 SS and have a medium matte finish on the interior.

Note that we offer hex nipples in 3 varieties; Economy cast, Premium, and Premium Loose. The item you're buying on this page is the ECONOMY HEX in 1/2" NPT (which measures approximately 13/16" across the threads and has a hex flat to flat measurement of 15/16").

This is all explained in excruciating detail below so that there is no confusion.




PLEASE BE AWARE that our series of "Cool Touch" hose connectors are NOT compatible with the economy hex nipples. They only work with either of the premium hex varieties. This only matters if you're buying the nipples specifically for use with those cool touch style connectors.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 7 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great value February 4, 2023
Reviewer: Jay Hager from Bend, OR United States  
Clean threads, great price.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Brewhardware = Good Stuff December 21, 2021
Reviewer: The Mot Brewer from FRANKLIN, TN United States  
Basic stainless steel 1/2" NPT Fitting. I buy because Brewhardware earns my my support with every order.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Fittings! September 14, 2018
Reviewer: William Ross Jr from LAKE IN THE HILLS, IL United States  
Its a fitting.  It's an especially nice fitting to use because you can just stick the 1/2" silicon tubing over and it stays put.  You can still pull it off of you want to.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 So far so good September 25, 2017
Reviewer: Stephen Cheng from Burke, VA United States  
Seem like they are well made

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 kettle conversion June 12, 2017
Reviewer: James Olson from Montross, VA United States  
I recently decided to convert my 20 year old kettle to electric and add some goodies, a thermometer and whirlpool arm. Using the supplies purchased here, the conversion went effortlessly and I saved a lot rather than purchasing an already prepared electric kettle. The online instructions were great! Thanks Jimo.


Was this review helpful to you?

View All Customer Reviews


Pinch Clamp small for up to 1/2" OD tubing (5/16 thinwall racking) $1.50
Columbus CTZ Hop Pellets, 8 OZ $13.19
Stainless Oxygen (O2) Diffusion Stone - Barbed - Fine - 1/2 Micron for O2 $10.99
Wine Corks, #9 Economy micro-agglomerated cork , 1000 count $135.00
Spincycle Whirlpool Arm for Pumped All In One Systems $27.00
RIMS Hardware Kit 12" Body Length - Male BLQD I/O Ports $149.00
Pressure Gauge 0-60 PSI, Economy $9.00
Carboy Calibration Decals $3.00
Sight Calibration Decals 5-60 in increments of 5 $3.00