We took this unit in trade for a customer that upgraded to a larger system. It has approximately 5 batches on it but it is in very good condition (other than the shoddy beginner welds).

UPGRADED WITH 2PBV drain valve with male camlock, Edge style pickup and whirlpool return in place of the thermometer.

10G Brewbuilt NPT kettle
Dial Thermometer
Ball valve drain with interior pickup tube
Two TIG welded 1.5" TC ports on the back left and right. IMPORTANT NOTE: I welded this kettle when I first started learning how to TIG weld. The welds are not great. See the pictures below. The welds don't leak and since this is on the hot side there really isn't any contamination risk either. It's just not a weld job that I'm proud of and there's a heavy discount involved to make up for that.
Two TC-integrated 1650w 120v Heating Elements with clamps and gaskets.
Two 15 amp cables with L6-30R ends that match the elements. (note you have to run each of these elements on separate 15 amp 120volt circuits. 3300 watts is plenty to boil 7.5 gallons of wort.




Getting this built at retail looks like this:






Here are the specs on the kettle that this was built on.
Key Features

• AISI304 Stainless Steel construction for longevity and excellent corrosion resistance.
• Stainless handles and rivets for secure lifting.
• Silicone coated kettle and lid handles for heat protection.
• Lid is designed to conveniently hang from a handle.
• 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching.
• 1.0mm (10 & 15 gal) or 1.2mm (22 & 30 gal) thick side walls resists denting.
• Two welded couplers for a lifetime of leak free use.
• 1/2" FPT internally threaded valve fitting for attaching various kettle fittings.
• Included two-piece, 304 stainless ball valve is easy to clean and reassemble.
• 1/2" MPT stainless plug and teflon tape included for thermometer port.
• 1.2:1 height:diameter ratio provides optimal evaporation rate during boiling.
• Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm.
• Internally etched volume markers from top to bottom for easy filling.