Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-200 in increments of 5
Sight Calibration Decals 5-200 in increments of 5
 
Our Price: $8.00

Quantity in Stock:18

Product Code: CAL5-200
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


Stainless Ball Lock Soda Bottle Carbonator / Carbonation PCO1881 Thread Cap with Interior DUOTIGHT STEM $11.99
1.5" Triclover (TC) to PCO1881 Male Thread Stainless Steel $9.99
1.5 TC x 3/8" Hose Barb $10.00
Double Roasted Crystal (DRC), Simpsons OZ $0.15
8-way CO2 Distribution Manifold Splitter with Male Flare $39.00
1.5" TC to Female Beer Thread Adapter $13.99
EZ Cap 1/2 Liter Clear Flip Top Bottles, Case of 12 $28.00
6-WAY CO2 DISTRIBUTION MANIFOLD SPLITTER - MFL I/O $62.00
Nitrogen Tank, FULL 22cuft with 100% Nitrogen Gas, NO SHIPPING $139.00