Home > Equipment > Fittings / Camlocks / Triclover > NPT Threaded Fittings >

SS Locknut, 1/2" NPS Pipe Thread with Large Flange
SS Locknut, 1/2" NPS Pipe Thread with Large Flange
 
Our Price: $4.99

Quantity in Stock:123

Product Code: LOCKNUT12FLANGE
Qty:

Description
 
These 304SS locknuts have 1/2" NPS straight thread so they will thread all the way down the threads of any NPT fitting. One side has an integrated round flat flange to provide a large surface area to back up a flat silicone gasket. This is a good choice for when your hole is a little oversized and the oring on a typical bulkhead is falling into the hole. As the hole gets larger, it becomes more important to center your fitting to keep the gasket overlapping the hole.

We use one of these locknuts on our VB2 bulkhead assemblies for inside the cooler.

The locknut is about 1/4" thick and the flange has a diameter of 1-3/8".

Accessories
Flat Silicone Gasket for 1/2" NPT, bulkheads, LTS sight kits, etc (13/16" ID x 1.25 OD)
Our Price: $1.45

Add
Flat Silicone Gasket for 1/2" NPT, bulkheads, LTS sight kits, etc (13/16" ID x 1.25 OD)

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 13 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Locknut May 13, 2024
Reviewer: Anthony Scardaville from Bridgeville , DE United States  
Well made, just what I needed!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Homemade Mash Tun January 26, 2021
Reviewer: Cee Dee from east Northport, NY United States  
I ordered all the parts to make my mash tun from Brew Hardware. Great quality and worked exactly as planned!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 July 23, 2020
Reviewer: Sean Powers from Columbus, OH United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Quality June 10, 2019
Reviewer: Jedediah Mullis from Clinton, UT United States  
This is the last piece I needed to finish the conversion of my 100 qt cooler into a Mash Tun. It worked perfectly.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect September 9, 2017
Reviewer: Stephen Lamade from East Northport, NY United States  
It's a known quality so I bought this as an extra because you never know when a project will come up in the future. I like the large flange because it allows me to customize the OD of whatever washer or gasket I'll be using.

Was this review helpful to you?

View All Customer Reviews


1" TC x Medium Weld Ferrule $3.49
Priming Sugar Dextrose Corn Sugar 4 Lb bulk bag $11.99
Fermentation Heat Wrap Heater (40 watts) $22.99
Brewer's Best 8 Gallon Economy Kettle $69.00
Stainless Steel Spoon, 24" $9.75
Omega Yeast Brettanomyces Claussenii OYL-201 (Similar to WLP-645) $10.99
Male Beer Thread (5/8" BSP 7/8"-14) to Female Garden Hose FGHT $9.00
Perle Hop Pellets, OZ $2.15
7.8 Gallon Bucket Lid Only - D&G $9.00