Home > Equipment > Vinyl Decals >

Sight Calibration Decals 2-15 in increments of 1
Sight Calibration Decals 2-15 in increments of 1
 
Our Price: $3.00

Quantity in Stock:26

Product Code: CAL2-15
Qty:

  
Description
 

If you transferred your sight kit to another pot, you'll need to recalibrate it so we are offering the numbers separately. These also complete the job if you've built your own DIY sight glass or (GASP!) purchased a kit from someone else. These now include 16 extra short arrows if you desire to mark in between the whole numbers.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 18 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Easy peasy August 2, 2020
Reviewer: Gabe Tanyi from Hamburg, NY United States  
Easy to put on once you've gotten your sight calibrated & easy to get off if you flubbed it up.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect September 4, 2019
Reviewer: Michael Beardsley from California  
Well printed

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Great product March 13, 2018
Reviewer: Jeffrey Watson from Issaquah, WA United States  
It could use some better installation instructions.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Professional grade March 9, 2018
Reviewer: Chuck Crowell from Powell, OH United States  
Just put these beauties on. WOW. Took me a bit to realize that there is the peeling of the decal off the backing and the clear mounting tape to be taken off. Very sharp and clear readings.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product and service December 22, 2017
Reviewer: guy hernandez from Brooklyn, NY United States  


Was this review helpful to you?

View All Customer Reviews


Kegging Multi Tool KOMOS Wrench $4.99
Pilsner Malt German, Bestmalz LB $2.28
Probe Compression Fitting 1/2" MNPT x 1/4 probe PCOMP1 $14.00
Brewer's Beast 16 Gallon Triclad Kettle with two welded ports $189.00
RIMS Hardware Kit 18" Body Length - 1.5" Triclover (TC) I/O Ports $158.00
Homebrew Decals - "Eat Sleep Brew" $2.00
Tailpiece, 1/4" 90 Degree Elbow Barb, Stainless Steel $4.85
1/4" NPT Female to 1/4" MFL Male Flare Adapter $3.75
Zythos Hop Pellets, OZ $2.31