Home > Equipment > BIAB (brew in a bag) >

Ratchet Pulley Hoist for BIAB Brewing, XL with 3/8" Rope
Ratchet Pulley Hoist for BIAB Brewing, XL with 3/8" Rope
 
Our Price: $17.99

Quantity in Stock:100

Product Code: RATCHET_XL_38
Qty:

Description
 
The 3/8" XL ratchet pulley that holds up to 250 pounds. Quite frankly, you will love the BIAB process if you use this with an overhead attachment point and you will hate it if you try to muscle the bag out by hand.

This one has an extra pulley mounted up high at the ceiling attachment point so that your pulling rope goes up and back down again. This adds 2x mechanical advantage (you pull down 25 pounds to lift 50 pounds) and it's a lot easier to pull downward.

Total rope is 17 feet. While most of our lifting for BIAB will keep the locking release tab within our reach, this unit also includes a thinner length of paracord attached to the release tab in case the locking pulley ends up just above your reach. You can remove this if you want to.

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 1 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
4 of 5 Must own for BIAB brewing March 7, 2025
Reviewer: J Thomas from Cleveland, TN United States  
A simple ratchet pulley that gets the job done. The larger your batch, the more you're going to appreciate it. The only negative is the bag wants to twist around when I'm letting it drain as I ramp up to a boil.

Was this review helpful to you?



EVAbarrier tubing, 3mm ID X 6.3mm OD TINY/Narrow (3ft length) BLACK $2.99
Male Camlock Socket Weld/Solder for 1/2" OD tubing $7.00
Steam Slayer DIY - 6 GPH Sprayer Tip Only $18.00
Pectic Enzyme 1 oz for Fruit Wine and Cider $2.48
Extract Kit: West Coast IPA (BJCP Style 21A) $59.40
Steam Slayer DIY - 16 GPH Sprayer Tip Only $36.00
Rubber Stopper, Drilled, #8.5 $1.67
Probe Compression Fitting 1/4" MNPT x probe PCOMP2 $13.00
Tailpiece, 1/2" Barb, Stainless Steel $4.50