Home >

EVAbarrier tubing, 3mm ID X 6.3mm OD TINY/Narrow (3ft length increments)
EVAbarrier tubing, 3mm ID X 6.3mm OD TINY/Narrow (3ft length increments)
 
Our Price: $2.99

Quantity in Stock:24

Product Code: EVABARRIERTUBING3MM3
Qty:

Description
 
While many beer enthusiasts are still unfamiliar with this tubing technology, it's rapidly becoming the defacto standard beverage AND gas tubing among perfectionists. The liner in this tubing keeps oxygen out better than all the other tubing we're aware of. It also is very inert and doesn't leach plastic flavors into the beer if it sits in there a while. Probably most importantly, it works really well with push-in style fittings such as Duotight brand, but it will also works with other industry names like John Guest and DMfit. One great feature is that it's available in very narrow inside diameters that helps us create balanced draft lines without having to coil up a bunch of extra tubing.

This 3mm ID version will pour very controlled pints at 8-12psi with only 3 feet of tubing. You can pour at a few less or more psi than that range, but the pour speed will vary as expected. As with any of our EVA Barrier sizes, we cut off a much longer roll of tubing so if you order more than QTY 1 we can leave the length longer for whatever application you had in mind. To be clear, in this case QTY 3 equals 9 feet.

Features:
  • The super slick inner liner is completely flavor neutral. Beer can sit in these lines for days and you can start pouring a pint WITHOUT dumping a single drop.
  • The barrier prevents oxygen from ingression into your lines. Believe it or not, most widely used beverage and gas tubing does NOT stop ambient oxygen from migrating into your kegging system. Quality nerds have even been known to disconnect their lines from kegs in between pours to keep oxygen from migrating into the keg.
  • The tubing can make use of the very simple push to fit connectors such as John Guest and DuoTight. This is a major time saver for initial builds and subsequent maintenance.
  • Much cheaper than all other so-called premium tubing.

This tubing works with Duotight or any other push in fittings meant for 1/4" or 6.3mm OD tubing.

There is currently a limited selection of duotight fittings that work with this size tubing.

Share your knowledge of this product. Be the first to write a review »


DIAMMONIUM PHOSPHATE 2oz DAP nutrient $4.39
Rubber Stopper, Solid, #7 $0.98
Briess DME Golden Light 1 lb Bag (Extract) $5.50
Rubber Stopper, SOLID, #2 $0.50
Weldless Plug Assembly "Dang It" for 1/2" holes (1/4" NPT) $7.50
Ball Valve, Male Beer Thread x Female Beer thread ball valve $19.99
Strata Hop Pellets, 2oz $4.68
Temp Controller, 240V/50a Brew Buddy II 3-Vessel, 2 Simultaneous Element Controller $1,499.00
Rubber Stopper, Drilled, #10 $1.75