Hot Pod Kettle Element Enclosure 2ETC4WF - TC2" Enclosure w/clamp, gasket, weld ferrule

Home > Equipment > Electric Brewing > Kettle Element Enclosures >

Our Price: $51.00

Quantity in Stock:13

Product Code: 2ETC4WF

Qty:

Description

Electric Kettle Enclosure with 2" TC flange, gasket, clamp and Medium Weld Ferrule .

This specific unit features an enclosure with a 2" TC (triclover) flange welded. It assumes you want to weld the included 2" TC weld ferrule to your vessel. We have other kits with various accessories included elsewhere on this site.

General info for all TC (triclover) based electrical enclosures:

The matter of enclosing the electrical connection of your heating element has long been the shortcoming of many Do-It-Yourself element installs. Many solutions relied on "potting" the exposed connections with silicone or epoxy which was a bit more permanent than practical. In addition to shielding the connections, another challenge is providing an earth ground point on the metal pieces. Our design solves both of these problems in an aesthetically pleasing and functionally adequate way. We have several options depending on whether you want to weld, solder or use gaskets to install your heating elements.

What's included with all enclosure options:

Screw-together canister with ground screw and cord grip.
Electrical Connection Parts: One pair of crimp-on ring terminals to connect your cord (up to 10 gauge wire) to the element, and a single ring terminal to attach an earth ground to the canister, a couple pieces of shrink wrap tubing (shrink it over your crimp terminals with a lighter).

Note!! electric heating element is NOT included with ANY of these kits.

The cord grip included with this kit will accommodate nearly any practical cord diameter from 14/3 SJ to 10/3 SJ cords.

Accessories

Heating Element, 5500 watt THREADED, All Stainless Steel

Heating Element, Threaded, 1650 watt, 120v, All Stainless Steel

Our Price: $39.00

Add

Our Price: $29.00

Add

Average Rating: Average Rating: 4.5 of 5

4.5 of 5 Total Reviews: 3 Click Here to Write a Review »

1 of 1 people found the following review helpful:

	July 26, 2022
Reviewer: Earl from Essex, MD United States

Excellent quality and in my opinion a better value for the money than other options on the market from competitors

Was this review helpful to you?

0 of 0 people found the following review helpful:

nice	January 24, 2017
Reviewer: Alan from NS Canada

will do the job. Slightly thinner than I expected

Was this review helpful to you?

0 of 0 people found the following review helpful:

Awesome product!	February 14, 2016
Reviewer: Ryan Fitzpatrick from Terryville, CT United States

Just got my kettles back from the welder yesterday, and put everything together. The only minor complaint is the grounding stud - the thing was a pain in the butt to get the nut onto. But everything else went together great, it looks great, and I love the fact that I can take the elements out easily for cleaning.

Was this review helpful to you?

	SS Locknut (NPS) - 1/4" NPT **Quarter Inch Pipe Thread $3.49**
	Sight Calibration Decals 2-25 in increments of 1 $5.00
	4" TC EPDM Gasket (for cold side use) $1.99
	Flow View Light Weight Sightglass - 1/2" *MALE* NPT Ports $31.00
	PBW, 4 LBs Powdered Brewery Wash $29.70
	Heating Element ORING THIN Silicone gasket $1.25
	3pc Ball Valve with 1/2" NPT ***MALE/Female Threads $21.49**
	Epsom Salts (Magnesium Sulfate) 1 LB bag $5.49
	Juniper Berries, 1oz $3.29