Home > Equipment > Fittings / Camlocks / Triclover > Triclover >

1.5" TC x 1/2" Compression Adapter
1.5" TC x 1/2" Compression Adapter
 
Our Price: $17.00

Quantity in Stock:41

Product Code: TC15COMP12


Compression Ferrule*:

Qty:  
Description
 
The 1-1/2" Triclover (TC) with a 1/2" compression on the back side (for 1/2" OD rigid tubing). Sanitary welded. Select between the easily lockable/removable nylon ferrule or the more permanent set of stainless ferrules. The compression fitting is bore-thru meaning there is no tube stop and a piece of tubing can pass straight through. Machined from 304SS. This size has a wrench hex on the TC flange side so that you can hold it firmly while setting the stainless ferrules. It is not shown in the picture.

Remember, 1.5" TC has an actual flange diameter of 2".

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Just What I Needed! February 4, 2020
Reviewer: John Cavaliere from Hudson, FL United States  
I wanted to attach a Blichmann Auto Sparge to  the 1/2 inch stainless inlet tube of my Sabco keg mash tun, with a tri clover connection. This fitting was perfect and the compression fitting fit on the end of the 1/2 inch tube perfectly. I secured it with 3 keg O-rings instead of the ferrules and it holds very tight but can be removed for cleaning. I could not have done this without this adapter! Thanks Bobby!

Was this review helpful to you?



2 Gallon Bucket Lid Only - Solid $2.25
pH Calibration Buffer Solution 7.01, Single Use Pack $1.79
Five Star Star San 32 oz starsan No Rinse Sanitizer $28.59
1.5 TC x 1/2" Female NPT Low Profile Adapter - With Stop $14.00
Water A Comprehensive Guide for Brewers Book $18.95
White Labs PPNG WLP833 German Bock Lager Liquid Yeast Pack $15.39
2" TC LONG Weld Ferrule $5.50
Carbonation Drops 54 - 60 count $4.68
1.5" TC Diptube or Whirlpool Return Friction Fit (Press Fit) $23.00