Home > Equipment > Kegging Parts > Beer Side, Faucets etc >

1.5" TC to Female Beer Thread Adapter
1.5" TC to Female Beer Thread Adapter
 
Alternative Views:
Our Price: $13.99

Quantity in Stock:77

Product Code: TC15XFEMALEBEERTHREAD
Qty:

Description
 
These fittings give you 1.5" TC Triclover ports on any beer thread fitting. The primary usage would be to create a Sanke Keg cleaning system based of a pump and hoses that already use TC flanges.

The fitting is shown threaded on to the beer out port of a Sanke coupler, but the coupler is not included obviously. In order to pump into the beer out of a Sanke coupler, you will need to remove the check ball from inside.

The fitting ships with a silicone oring installed.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 3 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome February 26, 2024
Reviewer: John Stephens from Royse City, TX United States  
Enjoy reading the wrapping paper from another state. 😂

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Game changer! April 20, 2021
Reviewer: Not from around here  
This is exactly why I shop here.  This is a pretty specialized part, but if you need it, where else could you possibly find it?!  Since I was modifying  an AerVoid beverage dispenser to become a mash tun, this was the missing link.  Thanks, Bobby!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
3 of 5 Nice, but threaded section too long for coupler November 25, 2019
Reviewer: Justin from Canada  
Seems like a good fitting. The larger bore + o ring design maximizes flow rate - ideal for keg cleaning and filling applications. The threads match well with the couplers I've tried. My only issue is that the threaded section is a bit too long and the fitting can not be installed far enough to compress the o-ring on some couplers I've tried. I hope to remove 3/8" from the threaded section or so, so I can use it as intended.

BrewHardware.com Response: That is very odd. They work for all the coupler types we have handy in the shop.  I'm sure there are a few odd designs out there.

Was this review helpful to you?



Anvil Foundry System 6.5 Gallon Electric System $385.00
Push Fit Fitting Duotight - 5/16 (8mm) OD Tube x 1/4" OD Tube Reducer $2.89
Chocolate Rye, Weyermann OZ $0.15
Keg Coupler, Low Profile, American Beers (Type D) With BALL LOCK $59.99
HotRod Heat Stick, 240 VOLT 5500 watt Ready to Use $169.00
Tap Tower, Brushed SS, for Single Faucet (not included) $81.00
Bru-1 Hop Pellets, LB $25.30
Cable, 6 feet, 10/3 Cord with NEMA L6-30P Locking Plug $29.00
Quick Disconnects (BLQD) Type D - FQD x FNPT $11.00