Home > Equipment > Keg, Pot, Cooler Parts > Valves >

2-piece (2pc) Ball Valve, 1/2" NPT, F/F Premium
2-piece (2pc) Ball Valve, 1/2" NPT, F/F Premium


 
Our Price: $13.99

Quantity in Stock:144


Product Code: 2PBV
Qty:

Description
 
This is a high quality 304 stainless 2-piece body with a non-restricting "full port" ball and 1/2" NPT female threads on both ends and a generous easy turning handle. Use them on your boil kettle, HLT, mash tun, pumps, etc. Price this against your local homecenter's brass alternative and you'll find it's not much more money to go stainless.

Note when comparing pricing that these are absolutely the smoothest operating valves that we've seen to date in the "under $40 price point". So many companies are offering cheaper and cheaper valves to attract customers but we dare anyone to compare the quality of these valves against the competition. To make this a "weldless" valve, please purchase a weldless bulkhead separately.
Our primary stock on valves have vinyl handle wraps branded with the BrewHardware.com name but we may ship units with generic graphics from time to time. Be assured that the actual valve is exactly the same.
Remember to use teflon tape on all threaded connections.

Please note: While two piece valves can be taken apart to gain access to the seals and ball, it is highly impractical to plan to do so. The amount of torque required to break the seal will likely damage the valve without attention to specific details. When taking it apart, a low profile plug should be inserted into both ends of the valve to prevent crushing when using a pipe wrench or bench vise. Box wrenches or 6 point sockets on breaker bars would be preferable as they apply more even pressure around the entire valve. If you think you be taking them apart often, you should look at the 3 piece (3PBV) valves as they come apart much easier. We do not provide warranty replacement on 2pc valves that are damaged when attempting to disassemble because it is always caused by using the wrong kind of wrenches. Very specifically, do not try using an adjustable wrench, a pipe wrench or any kind of pliers.
Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 54 Click Here to Write a Review »

Accessories
Cleaning Brush, 3/4" diameter
Our Price: $3.85

Add
Cleaning Brush, 3/4" diameter
Ball Valve Replacement Vinyl Handle Wrap
Our Price: $0.99

Add
Ball Valve Replacement Vinyl Handle Wrap
Heat Shield Large sideways clip for Ball Valves
Our Price: $10.00

Add
Heat Shield Large sideways clip for Ball Valves


  0 of 0 people found the following review helpful:
 
5 of 5 Nice valve. October 5, 2022
Reviewer: Gregory Stephens from Savannah, GA United States  
I needed it to go with the spin cycle and it’s stainless and is a nice valve. Price is good as well!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Brewhardware = Good Stuff December 21, 2021
Reviewer: The Mot Brewer from FRANKLIN, TN United States  
Basic stainless steel 1/2" ball valve. I buy because Brewhardware earns my my support with every order.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 June 21, 2021
Reviewer: Odin Anderson from Bellevue, WA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 March 12, 2021
Reviewer: Anthony Neal from Asheville, NC United States  
Great quality materials. Great Service. I will be looking to buy most of my brewing hardware here!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 works March 9, 2021
Reviewer: DANIEL ELLIOTT from Hixson, TN United States  
arrived in good condition, made it through my 1st brew session with it without issues

Was this review helpful to you?

View All Customer Reviews