Home > Equipment > Electric Brewing > Heating Elements > Heating Element Kit, 5500 watt TC Ripple, Solder TC, Clamp, Gasket
	Our Price: $109.00 Product Code: ELEMENTKIT_TCRIP_SOLDER Qty: The following items are included with this product: 1 of Heating Element, 5500 watt (240 Volts) 1.5" TC INTEGRATED Ripple V2 ($85.00 value!) 1 of 1.5 TC Clamp ($7.59 value!) 1 of 1.5 TC Silicone Gasket (Heat Resistant to 400F) ($2.00 value!) 1 of 1.5 TC Radius Face Solder Flange ($20.00 value!)

Description   If you don't have anything on your kettle and you want an easily removable element, this kit is for you. This version requires silver soldering. See the list of included parts. What this kit does NOT come with, but you will likely need, will be found in the optional accessories list on the right. Silver solder kit, 35mm hole saw, 10 gauge cable with L6-30R on the end. For more info on the silver soldering process, see the instructions and video on this product page. Element length is approximately 14.25" Long to the TC flange. With the added 1/2" from the TC flange, your pot must be at least 14" in diameter. Everything is 304 High polish stainless steel. These are made in China. Warranty is 3 months from date of purchase and does NOT cover damage due to dry firing. These elements must be submerged in liquid any time power is applied. It is extremely important that you consult with an electrical professional for advice or wiring help. Under no circumstances should these be used without proper wiring, ground fault circuit protection, over current circuit protection. We are not licensed electricians so we cannot provide wiring advice. Instructions Accessories Cable, 10/3 Extension Cord EIGHT FEET (8') Nema L6-30 Male and Female Cable, 10/3 Extension Cord TEN FEET (10') Nema L6-30 Male and Female Cable, 10/3 Cord with Nema L6-30R Twist Lock Cord Receptacle (approx 5ft) Silver Solder Kit (Harris Stay-Brite 8 and Stay-Clean Flux) Our Price: $39.00 Add Our Price: $42.00 Add Our Price: $29.99 Add Our Price: $12.99 Add Tungsten Carbide Hole Saw, 35mm or 1-3/8 Drill Bit, for Stainless Steel Receptacle, Nema L6-30R Twist Lock Cord Receptacle for 240v, 30 amps Cable, 10/3 SJEOOW High Temp Portable Power Cable by the foot Plug, Nema L6-30P Twist Lock Plug for 240v, 30 amps Our Price: $16.00 Add Our Price: $14.99 Add Our Price: $2.75 Add Our Price: $9.99 Add Average Rating: 5 of 5 Total Reviews: 7 Click Here to Write a Review »

0 of 0 people found the following review helpful:

DIY E-Kettle September 9, 2019 Reviewer: Frank Maritnek from Lakewood, OH United States   I finally jumped on board the electric brewing train! This kit made soldering a TC port to my kettle super simple. I went with solder over weldless so there would be less nooks and crannies for bacteria to hide since I like to do kettle sours. Was this review helpful to you?

0 of 0 people found the following review helpful:

Very nice October 12, 2018 Reviewer: Steve Jimmerson from Milton, FL United States   Bought 2 of these kits. Works great, easy to install. Only complaint was one of the gaskets is a little too large on one side and doesn't want to fit in the grove easily.  Radius worked well on my 14" and 16" pots. Was this review helpful to you?

1 of 1 people found the following review helpful:

5500 watt 240vac ULWD ripple heating element Kit November 30, 2017 Reviewer: Brewbuzzard from Carrollton, TX United States   I have two of these in my boil kettle and one in my HLT. They work great! The two in the BK are controlled by an EzBoil and can take 23 gal of wort from 168F to boiling in about 15 minutes without scorching the wort. You can't go wrong with these. Was this review helpful to you?

0 of 0 people found the following review helpful:

JT BRU MAN September 23, 2017 Reviewer: Jeffrey Tackett from Maurertown, VA United States   Very happy with this product ! Was this review helpful to you?

2 of 2 people found the following review helpful:

Electric Keggle Conversion September 17, 2017 Reviewer: Bradley Fernandez/Catalina Ruiz from Oldsmar, FL United States   Really impressed with the fit and finish of this Element. I looked at so many kits and just did not like any of the solution for the element wiring. I didn't want a big gnarly electric box hanging off my kettle and I also didn't want a permanently attached power cord either. This kit solved both of those issues. And the cost is about the same once you consider the cost of the additional pieces needed to get a tradition water heater element to work. Was this review helpful to you?

View All Customer Reviews

	Clarity-Ferm Haze and Gluten Reducing Enzyme 10ml $4.35
	Cellar Science German Weihenstephan Lager Dry Yeast (like W-34/70) 15g $3.29
	Replace Corny Keg Gas In Diptube $1.99
	pH Calibration Buffer Solution 4.01, Single Use Pack $1.79
	Male Camlock to Ball Lock Keg Post (free flowing) $5.99
	3" TC to PIN Lock LIQUID Post $19.99
	Briess DME Pale Ale 3 lb Bag (Extract) $15.40
	Universal Stopper Small - Solid $0.89
	Topsflo DC Brewing Pump Replacement Head Oring Gasket $2.99